Alpine TDM-7584R, TDM-7586RB, TDM-7582R owner manual Rear Output RCA Connectors

Page 25

1

Antenna Receptacle

! Remote Control Interface Connector

 

Connect to the supplied ISO antenna convertor plug.

(TDM-7586RB/TDM-7584R only)

2

Audio Interrupt In Lead (Pink/Black)

To remote control interface box.

 

Connect this lead to the Audio Interface output of a

" Rear Output RCA Connectors

 

cellular phone which provides ground shorting when

RED is right and WHITE is left.

 

a call is received.

# DIN Connector

3

Remote Turn-On Lead (Blue/White)

Connect this to the DIN connector on the CD

 

Connect this lead to the remote turn-on lead of your

Changer.

 

amplifier or signal processor.

$ DIN Extension Cable

4

Power Antenna Lead (Blue)

NOTE

 

Connect this lead to the +B terminal of your power

 

Older Alpine CD Changer came with standard, straight

 

antenna, if applicable.

type DIN connectors. In installations where an L-type

 

NOTE

connector would simplify installation, the Alpine 491002

 

Adaptor can be used (Sold Separately).

 

This lead should be used only for controlling the

 

 

 

vehicle's power antenna. Do not use this lead to turn on

% Power Supply Connector

 

an amplifier or a signal processor, etc.

& ISO Connector (Speaker Output)

 

 

5

Switched Power Lead (Ignition) (Red)

( Left Rear (+) Speaker Output Lead (Green)

 

Connect this lead to an open terminal on the vehicle's

) Left Rear (–) Speaker Output Lead (Green/

 

fuse box or another unused power source which

Black)

 

provides (+) 12V only when the ignition is turned on

~ Left Front (+) Speaker Output Lead (White)

 

or in the accessory position.

+ Left Front (–) Speaker Output Lead (White/Black)

6

Fuse Holder (15A)

, Right Front (–) Speaker Output Lead (Grey/

7

Battery Lead (Yellow)

Black)

 

Connect this lead to the positive (+) post of the

- Right Front (+) Speaker Output Lead (Grey)

 

vehicle's battery.

. Right Rear (–) Speaker Output Lead (Violet/

8

ISO Power Supply Connector

Black)

9

Ground Lead (Black)

/ Right Rear (+) Speaker Output Lead (Violet)

 

Connect this lead to a good chassis ground on the

: RCA Extension Cable (Sold Separately)

vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

To prevent external noise from entering the audio system.

•Locate the unit and route the leads at least 10cm away from the car harness.

•Keep the battery power leads as far away from other leads as possible.

•Connect the ground lead securely to a bare metal spot (remove the coating if necessary) of the car chassis.

•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various Alpine noise suppressors, contact them for further information.

•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

23-EN

Page 24 Page 25
Image 25
Page 24 Page 25
Contents TDM-7586RB Alpine CD Changers Give You More Contents Precautions Handling the Detachable Front Panel Basic Operation Connectable to Remote Control Interface BoxDetaching the Front Panel Initial System Start-UpAdjusting Source Signal Levels Turning Power On and OffTurning Loudness On/Off FAD ← BAL ←Automatic Seek Tuning Manual TuningManual Storing of Station Presets Radio OperationTuning to Preset Stations Automatic Memory of Station PresetsRecalling Preset RDS Stations Setting RDS Reception Mode and Receiving RDS StationsWhen the RDS station signal received has become weak RDS OperationWhen traffic information stations cannot be received PTY Programme Type TuningReceiving Traffic Information Receiving Traffic Information While Playing Tape or RadioReceiving RDS Regional Local Stations Priority NewsInserting/Ejecting Cassette Cassette Player OperationRepeat Play Normal Play and PauseScanning Programmes Fast Forward and RewindManual Reverse Programme Sensor P.SMusic Sensor M.S. Skip CD Changer OperationFast Forward and Backward X. Random Play Repeat Play on Single Track or Entire DiscTo Display CD Titles TDM-7586RB/TDM-7584R only Remote Control Operation Battery Replacement Case of Difficulty InformationRemote Control TDM-7586RB/TDM-7584R only SpecificationsPrecautions Installation and ConnectionsRemoval InstallationSpeakers ConnectionsTo prevent external noise from entering the audio system Rear Output RCA Connectors

TDM-7582R, TDM-7584R, TDM-7586RB specifications

The Alpine TDM-7586RB, TDM-7584R, and TDM-7582R are high-performance multimedia receivers that stand out in the automotive audio market. These models are designed to enhance the driving experience by delivering superior sound quality, versatile connectivity, and user-friendly interfaces.

One of the prominent features of these receivers is their advanced audio processing capabilities. The TDM-7586RB, for instance, incorporates a high-resolution DAC (Digital-to-Analog Converter) that ensures precise audio reproduction, delivering clear highs and deep bass. The TDM-7584R and TDM-7582R also inherit this feature, providing a premium audio experience no matter the genre of music. Additionally, built-in sound adjustment tools allow users to tailor the sound output to their preference, making it possible to adjust the equalizer settings according to individual taste.

Connectivity is a key highlight of these Alpine models. Each receiver supports Bluetooth technology for wireless audio streaming from smartphones and other devices. The inclusion of USB ports allows for direct playback from flash drives, while auxiliary inputs offer further versatility for connecting various external devices. Compatibility with both Android and iOS systems ensures that all users can easily integrate their smartphones for hands-free calling and navigation.

The TDM-7586RB features a larger, high-resolution touchscreen display that facilitates easy navigation through menus and settings, making it user-friendly. The TDM-7584R and TDM-7582R, while slightly smaller, maintain high visibility and responsiveness, ensuring that drivers can operate the receiver without distraction.

The receivers are also equipped with advanced radio functionality, providing access to FM and AM stations, as well as support for digital radio services in certain regions. The built-in tuner enhances the listening experience by delivering clear reception even in challenging environments.

In terms of build quality, the TDM series is designed to withstand the rigors of automotive environments. They feature durable materials and components that ensure long-lasting performance and reliability.

Overall, the Alpine TDM-7586RB, TDM-7584R, and TDM-7582R offer a blend of advanced audio technology, connectivity options, and user-oriented features, making them ideal choices for those looking to elevate their in-car entertainment experience.
Top Page Image Contents