ENGLISH
Using the Sound Control Memory
You can select and store a preset sound adjustment suitable for each playback source. (Advanced SCM)
Selecting and storing the sound modes
Once you select a sound mode, it is stored in memory, and will be recalled every time you select the same source. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, CD and external components.
•If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “To cancel Advanced SCM” on page 26.
“Link” indicator
2 1
1
Light “MODE” on the lower part of the display.
The number buttons can work as different function buttons.
Within
5 seconds
2
Select the sound mode you want.
Each time you press the button, the sound mode changes as follows:
SCM BEAT |
| SCM SOFT |
| ||
SCM OFF |
| SCM POP |
•If the “Link” indicator is lit on the display (with “SCM LINK” set to “LINK ON” — see page 26), the selected sound mode can be stored in memory for the current source, and the effect applies to the current source.
•If the “Link” indicator is NOT lit on the display (with “SCM LINK” set to “LINK OFF”), the selected sound mode effect applies to any source.
Indication | For: |
| Preset values | |
|
| Bass | Treble | BBEII |
SCM OFF | (Flat sound) | 00 | 00 | BBE 2 |
|
|
|
|
|
SCM BEAT | Rock or disco music | +02 | 00 | BBE 2 |
|
|
|
|
|
SCM SOFT | Quiet background music | +01 | Off | |
|
|
|
|
|
SCM POP | Light music | +04 | +01 | Off |
18