JVC KD-LX10 manual Radio Operations, Listening to the radio, Mode 1- 1 1

ENGLISH

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual searching to tune into a particular station.

Searching a station automatically: Auto search

LOCAL MODE 1- 1 1- 2 2

1 1	2
	Select the band.

1 Press SOURCE (ATT) to select the tuner as the source.

2Press BAND to select the band (FM1, FM2, FM3 or AM). Each time you press the button, the band changes as

follows: FM1 FM2 FM3 AM

Selected band appears.

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2	To search stations of
	higher frequencies	Start searching a station.

To search stations of	When a station is received, searching stops.
lower frequencies

To stop searching before a station is received, press the same button you have pressed

for searching.

To tune in FM stations only with strong signals

This function works only while searching FM stations, including SSM preset (see page 8).

1 Press MODE.

“MODE” appears on the lower part of the display, and the number buttons can work as different function buttons.

2 Press LOCAL, while “MODE” is still on the display, so that the LOCAL indicator lights up on the display.

Each time you press the button, the LOCAL indicator lights up and goes off alternately.

6