JVC KD-LX10 manual Storing stations in memory, FM station automatic preset SSM, 1 1

Page 8

ENGLISH

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

•Automatic preset of FM stations: SSM (Strong-station Sequential Memory)

•Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).

			2 1- 1 1- 2
1	2	Select the FM band number (FM1, FM2 or
1	2	Select the FM band number (FM1, FM2 or
		FM3) you want to store FM stations into.
		1	Press SOURCE (ATT) to select the tuner as the
			source.
		2	Press BAND to select the band (FM1, FM2, or FM3).

FM1 FM2 FM3 AM

2

Press and hold both buttons for more than 2 seconds.

“SSM” appears, then disappears when automatic preset is over.

Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).

When automatic preset is over, the station stored in number button 1 will be automatically tuned in.

8

Image 8

Contents Instructions KD-LX10Precautions Information For U.S.AContents How to use the number buttons To activate the display demonstration Turn on the power Adjust the volume Adjust the sound as you want see pages 16 Basic OperationsMode 1- 1 1 Radio OperationsListening to the radio Searching a station automatically Auto searchTune into a station you want while M is flashing When an FM stereo broadcast is hard to receiveSearching a station manually Manual search 1 1 FM station automatic preset SSMStoring stations in memory Manual preset Tune into a station of 88.3 MHz1- 2 Tuning into a preset stationSelect the number 1 6 for the preset station you want CD Operations Playing a CDOpen the loading slot Insert a disc into the loading slotSelect text display mode while playing a CD Text Playing a CD TextLocating a track or a particular portion on a CD To fast-forward or reverse the trackTo go to the next tracks or the previous tracks To go to a particular track directlyTo play back tracks repeatedly Repeat Play Selecting CD playback modesTo play back tracks at random Random Play Prohibiting CD ejection To play back only intros Intro ScanSound Adjustments Adjusting the soundSelect the item you want to adjust Adjust the levelTo cancel the Bbeii function, select BBE OFF Turning on/off the Bbeii functionUsing the Sound Control Memory Light Mode on the lower part of the displaySelect the sound mode you want Indication For Preset valuesRecalling the sound modes Storing your own sound adjustments To adjust the bass or treble levelRepeat the same procedure to adjust other sound modes To reset to the factory settingsSetting the clock Other Main FunctionsControlling the volume automatically Audio Cruise You can select the proper cruise mode for your carTo adjust the volume increase rate If Audio Cruise does not function correctlyChanging the general settings PSM Basic ProcedurePress SEL to finish the setting To cancel Advanced SCM To select the dimmer modeTo set the clock display To select the level meterTo select the scroll mode To change the AM/FM channel intervalsTo select the external component to use To make the front panel look flat hiding the control panelSources Maximum number of the characters Assigning names to the sourcesSelect a character To erase the input characters Available charactersInstalling the battery Remove the battery holderPlace the battery Return the battery holderUsing the remote controller Select the CD automatic changer CD Changer OperationsPlaying CDs To go to a particular disc directly To show the CD Text informationMode RND Indicator Plays at random Mode RPT Indicator Plays repeatedlyMode Indication Plays the beginnings 15 seconds INTPreparations Playing an external componentSelect the external component Maintenance Handling CDsTroubleshooting Symptoms Causes RemediesAM Tuner SpecificationsFM Tuner Call