Alpine TDM-7582E CD Changer Operation, Music Sensor M.S. Skip, Fast Forward and Backward

Controlling CD Changer (Optional)

The CD controls on the TDM-7582E will function only when a CD Changer (M-Bus) is connected.

1 Press the SOURCE button to activate the CD Changer.

The display shows the disc number and track number.

NOTE

To start play or pause playback, press the :/J button.

2 When a 6-disc CD Changer is connected: Press the Preset buttons to select the desired disc loaded in the CD Changer.

Music Sensor (M.S.) Skip

1 Momentarily press the g DN button once to return to the beginning of the current track.

If you wish to return to the beginning of a track further back, repeatedly press until you reach the desired track.

Press the f UP button once to advance to the beginning of the next track.

If you wish to advance to the beginning of a track further ahead, press repeatedly until the desired track is reached.

NOTE

The music sensor feature is functional in the play or pause mode.

Switching between Track No. and Elapsed Time Displays

1 Each press of the CLOCK button during CD playback causes change of the display between the track number and clock time.

2 Press and hold the CLOCK button for at least 2 seconds while the track number is displayed. The display changes to show the elapsed time for the track being played.

Fast Forward and Backward

1 Press and hold the g DN or f UP button to quickly move backward or forward respectively until you reach the desired portion.

NOTE

This feature works only in the CD playback mode.

Repeat Play on Single Track or Entire Disc

1 Press the REPEAT button to display "REPEAT" or "REPEAT ALL" to play back repeatedly the current track being played or the entire disc selected.

NOTE

Single track cannot be repeated during M.I.X. play.