Specifications, Indication for CD Changer

Indication for CD Changer

– – – H

•Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

E - 01

•Malfunction in the CD Changer.

-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.

Check the indication. Insert the magazine again. If the magazine cannot be pulled out, consult your

Alpine dealer.

•Magazine ejection not possible.

-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.

– – – –

•No magazine is loaded into the CD Changer. - Insert a magazine.

T – – –

•No indicated disc.

- Choose another disc.

•Misconnection or disconnection of CD Changer.

-Check connection between CD Changer and control unit.

Tuning Range	87.5 – 108.0 MHz
Mono Usable Sensitivity	9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity	13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity	80 dB
Signal-to-Noise Ratio	65 dB
Stereo Separation	35 dB
Capture Ratio	2.0 dB
AM TUNER SECTION
Tuning Range	531 – 1,602 kHz
Usable Sensitivity	22.0 µV
TAPE PLAYER SECTION
Tape Speed	1-7/8 ips (4.8 cm/sec) ±0.7%
Wow & Flutter	0.06%
Tape Signal-to-Noise Ratio	60 dB
Frequency Response
With Alpine Test Tape	30–20,000 Hz (±3 dB)
GENERAL
Power Requirement	14.4 V DC
	(11–16 V allowable)
Maximum Pre-Output Voltage	2 V/10k ohms
Maximum Power Output*	45 W ⋅ 4
Continuous Power Output**	19.5 W ⋅ 4
Output Voltage	500 mV/10 k ohms
Bass	±15 dB at 30 Hz
Treble	±10 dB at 10 kHz
Weight	1.4 kg (3 lbs. 1 oz)
CHASSIS SIZE
Width	178 mm (7")
Height	50 mm (2")
Depth	155 mm (6-1/8")
NOSEPIECE SIZE
Width	170 mm (6–3/4")
Height	46 mm (1-13/16")
Depth	19 mm (3/4")

Due to continuous product improvement, specifications and design are subject to change without notice.

*Under maximum operating voltage and input signal, into 4 ohms.

**0.8% THD, at 14.4 V battery voltage.

13-EN