JVC KD-R331, KD-R332 manual Scroll *3, Pro Eq, Balance *5, Loud, Mode, Hpf, Beep

	Menu item		Selectable setting, [Initial: Underlined]
		DIMMER SET	AUTO : Changes the display and button illumination between the Day/Night
DIMMER			adjustments in <BRIGHTNESS> setting when you turn off/on the car headlights *2. /
			ON : Selects the Night adjustments in <BRIGHTNESS> setting for the display and button
			illumination. / OFF : Selects the Day adjustments in <BRIGHTNESS> setting for the
			display and button illumination.
		BRIGHTNESS	DAY [ 25 ] / NIGHT [ 11 ] : Selects the display and button illumination brightness level
			[00 — 31] for day and night.
DISPLAY		SCROLL *3	ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at 5-second
			intervals). / OFF : Cancels.
			(Pressing DISP for more than one second can scroll the display regardless of the setting.)
		TAG DISPLAY	ON : Shows the Tag information while playing MP3/WMA tracks. / OFF : Cancels.
PRO EQ			See page 10.
		FADER *4, *5	R06 — F06 [ 00 ] : Adjusts the front and rear speaker output balance.
		BALANCE *5	L06 — R06 [ 00 ] : Adjusts the left and right speaker output balance.
		LOUD	ON : Boost low and high frequencies to produce a well-balanced sound at a low volume
			level. / OFF : Cancels.
		VOL ADJUST	–05 — +05 [ 00 ] : Presets the volume adjustment level of each source (except
			“FM”), compared to the FM volume level. The volume level will automatically increase or
			decrease when you change the source. Before adjustment, select the source you want to
			adjust. (“VOL ADJ FIX” appears on the display if “FM” is selected as the source.)
AUDIO		L/O MODE	SUB.W : Selects if the REAR/SW terminals are used for connecting a subwoofer (through
			an external amplifier). / REAR : Selects if the REAR/SW terminals are used for connecting
			the speakers (through an external amplifier).
		SUB.W LPF*6	LOW 55Hz / LOW 85Hz / LOW 120Hz : Frequencies lower than
			55 Hz/85 Hz/120 Hz are sent to the subwoofer.
		SUB.W LEVEL*6	00 — 08 [ 04 ] : Adjusts the subwoofer output level.
		HPF	ON : Activates the High Pass Filter. Low frequency signals are cut off from the front/rear
			speakers. / OFF : Deactivates (all signals are sent to the front/rear speakers).
		BEEP	ON / OFF : Activates or deactivates the keypress tone.
		TEL MUTING*7	ON : Mutes the sounds while using the cellular phone (not connected through
			KS-BTA100). / OFF : Cancels.
*2 The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting may not work
correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to
any other than <DIMMER AUTO>.
*3 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*4 If you are using a two-speaker system, set the fader level to “00.”
*5 This adjustment will not affect the subwoofer output.
*6 Displayed only when <L/O MODE> is set to <SUB.W>.
*7 This setting does not work if <BT ADAPTER> is selected for <R-AUX> of the <SRC SELECT>.
			Continued...
			ENGLISH	11