JVC KD-R331 How to forcibly eject a disc, If this does not work, reset your unit, Handling discs

Page 3

How to attach/detach the control panel

How to reset your unit

Your preset adjustments will also be erased.

How to forcibly eject a disc

[Hold]

Be careful not to drop the disc when it ejects.

If this does not work, reset your unit.

Condensation : When the car is air- conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.

Temperature inside the car : If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

CONTENTS

3How to attach/detach the control panel

3How to reset your unit

3How to forcibly eject a disc

3About discs

4Canceling the display demonstration

4Setting the clock

5Basic operations

6Listening to the radio

8 Listening to a disc

9Connecting the other external components

9Listening to the other external components

10Selecting a preset sound mode

10Menu operations

13Troubleshooting

14Using Bluetooth® devices

15Specifications

15 Maintenance

About discs

This unit can only play the CDs with:

Discs that cannot be used:

Discs that are not round.

Discs with coloring on the recording surface or discs that are dirty.

You cannot play a Recordable/ReWritable disc that has not been finalized. (For the finalization process refer to your disc writing software, and your disc recorder instruction manual.)

8 cm CD cannot be used. Attempt to insert using an adapter can cause malfunction.

Handling discs:

Do not touch the recording surface of the disc.

Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

Do not use any accessories for the disc.

Clean from the center of the disc and move outward.

Clean the disc with a dry silicon or soft cloth. Do not use any solvents.

When removing discs from this unit, pull them out horizontally.

Remove the rims from the center hole and disc edge before inserting a disc.

ENGLISH

3

Image 3
Contents Affichages, référez-vous à la KD-R332/KD-R331European Union only Battery ProductsThank you for purchasing a JVC product To obtain the best possible performance from the unitHandling discs How to forcibly eject a discIf this does not work, reset your unit Discs that are not roundCanceling the display demonstration Setting the clockInitial setting Basic operations Button General operationSource Listening to the radio Improving the FM reception Manual presetting FM/AMAutomatic presetting FM Selecting a preset stationAutomatic station selection TA Standby ReceptionNews Standby Reception Tracing the same programmeSelecting a track/folder from the list Listening to a discStopping playback and ejecting the disc Selecting a track/folderListening to the other external components Connecting the other external componentsDemo Selecting a preset sound modeStoring your own sound mode Menu operationsLoud Scroll *3PRO EQ Balance *5Mono *9 AMP GAIN*8AF-REG*10 NewsSymptom Remedy/Cause TroubleshootingReceiving a call Using Bluetooth devicesAdjusting the microphone volume About microphone volumeCleaning the connector SpecificationsMaintenance Cleaning the unitNotification Merci pour avoir acheté un produit JVCPile Produits Union européenne seulementPropos des disques Comment forcer l’éjection d’un disqueManipulation des disques Réglage initial Réglage de l’horlogeTouche Opérations de baseSélection d’une station préréglée Écoute de la radioPréglage manuel FM/AM Préréglage automatiqueSélection automatique des Pour mettre en service l’attente de réception TAAttente de réception TA Poursuite du même programmeSélection des modes de lecture Écoute d’un disqueArrête de la lecture et éjection du disque Sélection d’une plage/dossierRéglage Connexion d’autres appareils extérieursÉcoute d’un autre appareil extérieur PriseSélection d’un mode sonore préréglé Mémorisation de votre propre mode sonoreUtilisation des menus ’éclairage des touches 00 31 pour le jour et la nuit Faibles niveaux de volume. / OFF AnnulationOn / OFF Met en ou hors service la tonalité des touches ’éclairage de l’affichage et des touchesRéglages pouvant être choisis, Réglage initial Souligné Article de menuSymptôme Remède/Cause Guide de dépannageKS-BTA100 Utilisation de périphériques BluetoothNettoyage du connecteur Entretien16,3 dBf 1,8 μV/75 Ω Nettoyage de l’appareil