JVC KD-SH55 manual To set the clock display Clock Disp, To select the level meter LEVEL/EQ

Page 19

To set the clock display – CLOCK DISP

You can set the clock to be shown on the display when the unit is turned on.

When shipped from the factory, the clock is set to be shown on the display.

•CLOCK ON: Clock display is turned on.

•CLOCK OFF: Clock display is turned off.

To select the level meter – LEVEL/EQ

You can select the level display according to your preference.

When shipped from the factory, this mode is set to “LEVEL+EQ.”

• EQ ONLY:

Equalizer pattern is displayed.

•LEVEL+EQ: Equalizer pattern is displayed along with audio level meter.

•LEVEL ONLY: Audio Level meter illuminates upward and downward from center.

To select the dimmer mode – DIMMER

When you turn on the car headlights, the display automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer mode is activated.

•AUTO: Activates Auto Dimmer.

•OFF: Cancels Auto Dimmer.

• ON:

Always dims the display.

Note:

Auto Dimmer equipped for this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.

In this case, set the dimmer mode to “ON” or “OFF.”

To turn on/off the key-touch tone – BEEP SW

You can deactivate the key-touch tone if you do not want it to beep each time you press a button. When shipped from the factory, the key-touch tone is activated.

•BEEP ON: Activates the key-touch tone.

•BEEP OFF: Deactivates the key-touch tone.

To turn on/off the power amplifier switch

– P. AMP SW. (For KD-SH77 only)

You can switch off the built-in amplifier and send the audio signals only to the external amplifier(s) to get clear sounds and to prevent internal heat buildup inside this unit.

When shipped from the factory, the power amplifier switch is turned on so that the built-in amplifier works.

•P. AMP ON: Select this mode when not using external amplifier(s).

•P. AMP OFF: Select this mode when using external amplifier(s).

To adjust the display contrast level

– CONTRAST

You can adjust the display contrast level among 1 (dark) to 10 (bright). When shipped from the factory, the display contrast level is set at level 5.

To select the scroll mode – SCROLL

You can select the scroll mode for the disc information if it consists of more than 10 characters.

When shipped from the factory, Auto Scroll mode is set to “ONCE.”

•ONCE: Scrolls only once.

•AUTO: Repeats the scroll (5-second intervals in between).

• OFF:

Cancels Auto Scroll.

Note:

Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP (D) for more than 1 second.

To select the subwoofer cutoff frequency

– CUTOFF F (For KD-SH77 only)

When a subwoofer is connected to this unit, select an appropriate cutoff frequency level for your subwoofer.

When shipped from the factory, the subwoofer cutoff frequency is set to “FREQ MID.”

•FREQ LOW: Frequencies higher than 50 Hz are cut off to the subwoofer.

•FREQ MID: Frequencies higher than 80 Hz are cut off to the subwoofer.

•FREQ HIGH: Frequencies higher than 120 Hz are cut off to the subwoofer.

ENGLISH

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents For customer Use CD Receiver Receptor CON CD Recepteur CD KD-SH77/KD-SH55Precautions How to reset your unitInformation For U.S.A Contents Only for KD-SH77 How to use the number buttonsLocation of the Buttons Control panelFor this model Remote controllerChanges the angle of the control panel in three PositionsReturn the battery holder Installing the batteryRemove the battery holder Place the batteryTo turn off the power To drop the volume in a momentBasic Operations Searching a station manually Manual search Radio Basic OperationsListening to the radio Searching a station automatically Auto searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Manual preset Tuning into a preset stationTune into a station of 88.3 MHz Open the loading slot CD OperationsPlaying a CD To stop play and eject the CDTo fast-forward or reverse the track Select text display mode while playing a CD TextPlaying a CD Text To go to a particular disc directlyTo play back tracks at random Random Play To cancel the prohibition and unlock the CDProhibiting CD ejection To play back only intros Intro scanBAL Sound AdjustmentsAdjusting the sound Reinforcing the bass soundPress EQ Select the sound mode you wantAdjust the selected sound element Storing your own sound adjustmentsTo reset to the factory settings Press SEL select to select sound elements to adjustOther Main Functions Setting the clockChanging the general settings PSM Basic ProcedurePreferred Setting Mode PSM items To set the clock display Clock Disp To select the dimmer mode DimmerTo adjust the display contrast level To select the scroll mode ScrollTo change the FM tuner selectivity To adjust the line input level Line ADJTo adjust the auxiliary input level To turn the demo mode on or offSources Maximum number Characters To erase the input charactersSelect a source you want to assign a name to Select a characterChanging the control panel angle When using the remote controlAdjust the angle to the position you want To restore the control panel to the original positionAttaching the control panel Detaching the control panelUnlock the control panel MP3 player, MD player, etc External Component OperationsFor KD-SH77 Select the external component AUX Input or Line InputWhen connecting a VCR When connecting a DVD playerFor KD-SH55 Playing CDs CD Changer OperationsSelect the CD automatic changer CD Changer INTRO1 INTRO2 CanceledCapital letters Numbers and symbolsIndication Preset equalizing values Additional InformationHandling CDs MaintenanceSymptoms Causes Remedies TroubleshootingAM Tuner SpecificationsPower Requirement FM TunerCall
Related manuals
Manual 38 pages 22.86 Kb
Top Page Image Contents