JVC KS-FX911, KS-FX811 To select the level meter Level, To select the dimmer mode Dimmer, Ext

	To set Custom Equalizer Link – CEQ LINK
ENGLISH
	A different sound mode (C-EQ) can be stored in
	memory for each source so that you can change
	the sound modes simply by changing the sources.
	When shipped from the factory, this mode is
	deactivated.
	• LINK ON:	Different sound modes for different
		sources.
	• LINK OFF:	One sound mode for all sources.

To select the level meter – LEVEL

You can select the level display according to your preference.

When shipped from the factory, “AUDIO 2” is selected.

•AUDIO 1: Level meter illuminates from bottom to top.

•AUDIO 2: Alternates level meter (moves from

	bottom to top) and illumination
	display.
• OFF:	Erases the audio level indicator.

To select the dimmer mode – DIMMER

(only for KS-FX911)

When you turn on the car head lights, the display automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer mode is activated.

• AUTO:		Activates Auto Dimmer.
•	OFF:	Cancels Auto Dimmer.
•	ON:	Always dims the display.

Note:

Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.

In this case, set the dimmer mode to “ON” or “OFF.”

To select the telephone muting – TEL

(only for KS-FX911)

This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2,” whichever mutes the sounds from this unit.

When shipped from the factory, this mode is deactivated.

•MUTING 1: Select this if this setting can mute the sounds.

•MUTING 2: Select this if this setting can mute the sounds.

• OFF: Cancels the telephone muting.

To select the external component to use

–EXT IN

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component – CD changer or external component

– to use.

When shipped from the factory, CD changer is selected as the external component.

• LINE IN: To use the external component other than CD changer.

• CHANGER: To use the CD changer.

Note:

For connecting the Line Input Adaptor KS-U57 and the

external component, refer to the Installation/Connection

Manual (separate volume).

18