JVC KS-FX811, KS-FX911 manual Specifications, FM Tuner, Power Requirement, AM Tuner

Page 25

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front: 50 W per channel

Rear: 50 W per channel

Continuous Power Output (RMS):

Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than

0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω, 40 Hz to

20 000 Hz at no more than

0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±9 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0 V/20 kΩ load (250 nWb/m)

TUNER SECTION

Frequency Range:

FM: 87.5 MHz to 108.0 MHz

AM: 531 kHz to 1 602 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)

50 dB Quieting Sensitivity:

16.3dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

CASSETTE DECK SECTION

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 100 sec. (C-60) Frequency Response (Dolby B NR OFF):

30 Hz to 16 000 Hz (Normal tape)

Signal-to-Noise Ratio: (Normal tape) (Dolby B NR ON): 65 dB (Dolby B NR OFF): 56 dB

Stereo Separation: 40 dB

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground Allowable Operating Temperature:

0°C to +40°C Dimensions (W x H x D):

Installation Size:

182 mm x 52 mm x 150 mm Panel Size: 188 mm x 58 mm x 14 mm

Mass: 1.3 kg (excluding accessories)

Design and specifications subject to change without notice.

ENGLISH

[AM Tuner]

Sensitivity: 20 μV

Selectivity: 35 dB

Having TROUBLE with operation?

Please reset your unit

Refer to page 2

25

Image 25
Contents KS-FX911 KS-FX911/KS-FX811KS-FX811 GET0069-001A UContents Control panel Location of the ButtonsDisplay window Place the battery Installing the batteryReturn the battery holder Remove the battery holderRM-RK50 Remote controllerTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsListening to the radio Radio OperationsSearching a station automatically Auto search Searching a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Manual preset Tuning in to a preset stationOther stations into other preset Numbers Tune in to a station in this Example, of 88.3 MHzListening to a cassette Tape OperationsTo stop play and eject the cassette To fast-forward and rewind a tapeTo cancel the prohibition and unlock To cancel the Dolby B NR, repeat steps 1 and 2 above againProhibiting cassette ejection To play back tapes recorded with the Dolby B NRPlaying the current tune repeatedly Other convenient tape functionsAdjusting the sound Sound AdjustmentsSelect the sound mode you want Selecting preset sound modes C-EQ Custom EqualizerIndication For Preset values Press EQCall up the sound mode you want to adjust Storing your own sound adjustmentsSelect the sound mode you want to adjust When CEQ Link is set to Link OFFChanging the general settings PSM Setting the clockBasic Procedure Other Main FunctionsPreferred Setting Mode PSM items To select the level meter Level To select the dimmer mode DimmerTo select the telephone muting TEL To select the external component to useAttaching the control panel You can detach the control panel when leaving the carDetaching the control panel Playing CDs CD Changer OperationsTo fast-forward or reverse the track Select the CD automatic changer CDTo go to a particular disc directly CanceledRND1 RND2 To play back tracks repeatedly Repeat PlaySelect the external component Line External Component OperationsTo clean the head MaintenanceTo keep the tape clean Ignition key-off release/Ignition key-on playSymptoms Causes Remedies TroubleshootingPower Requirement SpecificationsFM Tuner AM Tuner