JVC KS-FX742R manual Storing your own sound adjustments, Select the sound mode you want

To reset to the factory settings, repeat the same procedure and reassign the preset values listed in the table on the left column.

Repeat the same procedure to store other sound modes.

6

• See page 20 for details.

Equalization pattern changes as you adjust the bass or treble.

Ex.: When you adjust “TRE” (treble)

4 Repeat steps 2 and 3 to adjust the other items.

5 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.

Your adjustment made for

the selected sound mode is stored in memory.

Adjust the bass or treble level or turn the loudness function ON/OFF.

3

Select “BAS” (bass), “TRE” (treble), or “LOUD” (loudness).

2

1 Call up the sound mode you want to adjust.

• See left column for details.

Selecting preset sound modes

You can select a preset sound adjustment suitable to the music genre.

Select the sound mode you want.

Each time you press the button,

the sound mode changes as

follows:

SCM OFF BEAT SOFT POP

Ex.: When you select “BEAT”

Indication	For:	Preset values
		BAS	TRE	LOUD
SCM OFF	(Flat sound)	00	00	OFF
BEAT	Rock or	+02	00	ON
	disco music
SOFT	Quiet	+01	–03	OFF
	background
	music
POP	Light music	+04	+01	OFF

Notes:

•You can adjust each sound mode to your preference, and store it in memory.

If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” below.

•To adjust the bass and treble reinforcement levels or to turn on/off the loudness function, see page 20.

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory.

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

ENGLISH

21