3 Start searching for an ensemble.
Press ¢to search for ensembles of higher frequency.
Press 4 to search for ensembles of lower frequency.
When an ensemble is received, searching stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4 Select a service you want to listen to.
1 Press MODE to enter the functions mode while listening to the DAB tuner.
2Press ¢or 4 to
select a service you want, while still in the functions mode.
To change the display information while tuning in an ensemble
Normally service name is shown on the display. If you want to check the ensemble name or its frequency, press DISP (display).
Each time you press the button, the following information appears for a while on the display.
Service name Ensemble name
Clock |
| Channel number | ||
|
|
|
| |
|
|
|
|
|
DAB band |
| Frequency | ||
|
To tune in to a particular ensemble without searching
Before you start....
Press FM/AM (DAB) briefly if tape, CD changer, or external component is the current source.
1 Press and hold FM/AM (DAB) to select DAB tuner as the source.
2 Press FM/AM (DAB) repeatedly to select the DAB band (DAB1, DAB2, or DAB3).
3 Press and hold ¢or 4 for more than one second.
4 Press ¢or 4 repeatedly until the ensemble you want is reached.
•If you hold down the button, the frequency keeps changing until you release the button.
5 Select a service you want to listen to.
1Press MODE to enter the functions mode while listening to the DAB tuner.
2Press ¢or 4 to select a service you want, while still in the functions mode.
ENGLISH
To restore the FM/AM tuner
Press and hold FM/AM (DAB) again.
31