ENGLISH
To set the changer display—CH DISP
This mode is used to check the display information of the CD changer.
When shipped from the factory, “DISC” is selected.
•DISC: Disc number and track number appear.
•TIME: Elapsed playing time and track number appear.
To select the level meter—LEVEL
You can select the level display according to your preference.
When shipped from the factory, “AUDIO 2” is selected.
•AUDIO 1: Shows the audio level indicator.
•AUDIO 2: Alternates “AUDIO 1” setting and illumination display.
• OFF: | Erases the audio level indicator. |
To select the telephone muting—TEL
This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2” whichever mutes the sounds from this unit. When shipped from the factory, this mode is deactivated.
•MUTING 1: Select this if this setting can mute the sounds.
•MUTING 2: Select this if this setting can mute the sounds.
• OFF: | Cancels the telephone muting. |
To select the external component to use
—EXT IN
You can connect the external component to the CD changer jack on the rear using the Line Input Adapter
To use the external component as the playback source through this unit, you need to select which
When shipped from the factory, CD changer is selected as the external component.
• | CHANGER: To use the CD changer. |
• | LINE IN: To use the external component |
| other than CD changer. |
Note:
For connecting the Line Input Adapter
24