TAPE OPERATIONS
ENGLISH
Listening to a cassette
You can play back type I (normal) tapes.
1 Open the control panel.
Note on
When a cassette is already in the cassette compartment, select tape as the source by pressing TAPE
2 Insert a cassette into the cassette compartment.
The unit turns on and tape play starts automatically.
3 Close the control panel by hand.
4 Select the tape direction.
To stop play and eject the cassette
Press 0.
Tape play stops, the control panel opens and then the cassette automatically ejects from the cassette compartment. The source changes to the previously selected one.
If you change the source, tape play also stops (without ejecting the cassette this time).
•You can eject the cassette while the unit is turned off by pressing 0.
To fast-forward and rewind a tape
Press ¢ 
for more than
1 second to
When the tape reaches its end, the tape is reversed and playback starts from the beginning of the other side.
Press 4 
for more than 1 second to rewind the tape. When the tape reaches its end, playback of the same side starts.
To stop fast forward and rewind at any position on the tape, press `.
Tape play starts from that position on the tape.
Notes:
• When one side of the tape reaches its end during |
play, the other side of the tape automatically starts |
playing. (Auto Reverse) |
10
Each time you press `, the tape direction changes alternately forward
(TAPE 
) and reverse
(TAPE 
).
• When the tape reaches its end while |
the tape direction will be changed automatically. |