JVC KS-F161 manual Specifications, Rear 16 watts per channel into 4 Ω

Page 16

SPECIFICATIONS

ENGLISH

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front: 40 watts per channel

Rear: 40 watts per channel Continuous Power Output (RMS):

Front: 16 watts per channel into 4 ,

40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.

Rear: 16 watts per channel into 4 ,

40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 (4 to 8 allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: 1.0 V/20 kload (250 nWb/m)

TUNER SECTION

CASSETTE DECK SECTION

Wow & Flutter: 0.15% (WRMS)

Fast-Wind Time: 190 sec. (C-60) Frequency Response:

50 Hz to 14 000 Hz (normal tape) Signal-to-Noise Ratio: 52 dB Stereo Separation: 40 dB

GENERAL

Power Requirement

Operating Voltage: DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground Allowable working temperature:

0˚C to + 40˚C Dimensions (W x H x D) Installation Size:

182 mm x 52 mm x 150 mm

Panel Size: 188 mm x 58 mm x 14 mm Mass: 1.3 kg (excluding accessories)

Frequency Range

Design and specifications subject to change without

FM: 87.5 MHz to 108.0 MHz

notice.

AM: 531 kHz to 1 602 kHz

 

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 )

50 dB Quieting Sensitivity:

16.3dBf (1.8 µV/75 )

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 2.0 dB

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to Reset

16

Image 16
Contents KS-F161 GET0053-001A UContents Loud Loudness indicator Location of the ButtonsControl panel Display windowTo drop the volume in a moment To turn off the powerTo decrease the volume Select the sourceWhen a station is received, searching stops Radio Basic OperationsListening to the radio Select the band FM1 3, AMWhen an FM stereo broadcast is hard to receive Storing stations in memoryTune into a station you want while M is flashing Select the FM band FM1 3 you want to store FM stations intoFM1 FM2 FM3 Tune into a station of 88.3 MHzSelect the number 1 6 for the preset station you want Tuning into a preset stationTo tune in the favorite station Tape Operations Listening to a cassetteTo stop play and eject the cassette To fast-wind a tapeSound Adjustments Adjusting the soundSelect the item you want to adjust Adjust the levelTo reset to the factory settings AdjustmentsStoring your own sound Display mode Setting the clockOther Main Functions How to detach the control panel How to attach the control panelYou can detach the control panel when leaving the car ConnectorsTo clean the heads MaintenanceTo keep the tape clean Troubleshooting Specifications Rear 16 watts per channel into 4 ΩFM 87.5 MHz to 108.0 MHz AM 531 kHz to 1 602 kHz Sensitivity 20 µV Selectivity 35 dBKS-F161 ﺖﻴﺳﺎﻛ ﺔﻃﺮﺷا ﻞّﻐﺸﻣ ﻊﻣ ﻮﻳدار ÆqBHM*« ¹ ¨?KF* WłUŠ Ë« Ëœ« ’u?B? UB… eNłô« ŸuªÿË¡ª≈¥·ºß§«§ÿ¡ ÆrJײ « WŠu qB Qł« s RJײ « WŠu ‡æËÕª≈¥·ºß§«§ÿ¡ÕÕÆwHK« ¡e« -dŠ ¨UN« Ÿe½ q³ ÆrJײÆWM¹e ÆÃ-U« vUN« V×Ý« ¨È dšô« sŽ …bŠ«u«bOFС¬‡Àµÿ ‡ ’¬ß¡’ª-≠À‡¡ËÕ∂Õ¥ÿ¥ª√-Õπ’È ² «‰u??B?Š v? ??O? UŽUL-d`O×qJAÐ w· DDldLŠô« Ëeð „öÝ« qOq³