Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band.
1 Select the band (FM 1 – 3, AM) you want to store Stations into (in this example, FM 1).
Each time you press the button, the FM band changes as follows:
F M | FM1 | FM2 |
FM3 |
| |
|
|
2 Tune into a station of 88.3 MHz.
To tune into stations of higher frequencies.
Storing your favorite stations into the
You can preset an FM or AM station (such as your favorite station or traffic announcement station); and recall it by one touch operation even if the unit is turned off.
Ex: Storing an FM station of 88.3 MHz into the one- touch operation button (EX).
1 Select the band (FM1 - 3, AM) you want to store stations into (in this example, FM1).
F M | Each time you press the | |
button, the FM band | ||
| ||
| changes as follows. |
ENGLISH
To tune into stations of lower frequencies.
FM1
FM2 
FM3
2 Turn into a station (in this example, of
88.3 MHz).
3 Press and hold the button (in this example, 1) for more than 2 seconds.
3 Press and hold the button for more than 2 second.
E X
Press number “P1” flashes for a while.
4 Repeat the above procedure to store other stations into other preset numbers.
Note:
•A previously preset station is erased when a new station is stored in the same preset number.
•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.
“P0” flashes on the display, showing that the station has been preset.
7