Technical specifications, Water Pressure | Zanussi IZ10 instruction

Technical specifications

DIMENSIONS	Height	85 cm
	Width	60 cm
	Depth	60 cm

MAXIMUM LOAD	Cotton	5.5 kg
	Synthetics	2.5 kg
	Delicates	2.5 kg
	Woollens	2 kg

SPIN SPEED		1200 rpm max.

POWER SUPPLY VOLTAGE/FREQUENCY		220-230 V/50 Hz
TOTAL POWER ABSORBED		2200 W
MINIMUM FUSE PROTECTION		10 A

WATER PRESSURE	Minimum	500 kPa
	Maximum	800 kPa

This appliance complies with the following EEC Directives: 73/23/EEC of 19/02/73 relating to low voltage

89/336/EEC of 03/05/89 relating to electromagnetic compatibility.

Image 6

Contents

Automatická Pračka Automatická Práčka Dear customer Contents General safety Tips for environmental protection Child safetyDisposal Packaging materials Technical specifications Water Pressure Positioning InstallationUnpacking Water inlet Water drainage Electrical connectionConnect the machine to an earthed socket Door locked pilot light Your new washing machineDescription of the appliance Detergent dispenser drawer Use Display Options buttonTime Save button Drain only SKIP/RESET button START/PAUSE button If the machine is switched off Delay buttonProgramme phase indicator lights Example Sorting the laundry TemperaturesLaundry weights Before loading the laundry Do not use acetone on artificial silk Detergents and additivesQuantity of detergent to be used Degrees Bleaching Dry cleaningEnergetic wash Delicate wash Ironing Measure out the detergent Switch the machine onPlace the laundry in the drum Measure out the additive Select the spin speed or the Rinse Hold option Select the temperatureSelect the Delay Time Select the desired options How to change a programme during its cycle How to cancel a programme during its cycleEnd of programme Washing programmes Bodywork MaintenanceDoor seal Drain filter Water inlet filter Emergency emptying out Something not working? Laundry is not spun enough Door will not openSpinning starts late or Water is not visible