Problem

 

Possible cause

 

 

 

 

The door will not open:

The water level is above the bottom edge of the door.

 

 

The machine is heating the water.

 

 

The drum is turning.

 

 

The door can only be opened when the relevant

 

 

light has gone out.

 

 

 

• Spinning starts late or the

The electronic unbalance detection device has cut

 

laundry is not spun enough:

 

in because the laundry is not evenly distributed in

 

 

the drum. The laundry is redistributed by reverse

 

 

 

 

 

 

rotation of the drum. This may happen several

 

 

 

times before the unbalance disappears and normal

 

 

 

spinning can resume. If, after 6 minutes, the

 

 

 

laundry is still not evenly distributed in the drum,

 

 

 

the machine will spin at a lower speed. If at the end

 

 

 

of the programme the laundry is not spun enough,

 

 

 

redistribute the load manually and select the spin

 

 

 

programme.

 

 

 

• Water is not visible in the

The machine, which is the result of modern

 

machine:

 

technology, runs in a very economical way with low

 

 

water consumption. Performance is nevertheless

 

 

 

 

 

 

excellent.

 

 

 

 

The machine makes an unusual

The machine is fitted with a commutator motor

 

noise:

 

which improves machine performance.

 

 

 

 

 

 

 

If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.

P0042

24

Page 24
Image 24
Zanussi IZ10 manual Door will not open, Spinning starts late or, Laundry is not spun enough, Water is not visible, Noise