Kenwood TM-D700 E Visual Scan, Selecting the Number of Channels, Mode 1 31 ch, Mode 2 61 ch

VISUAL SCAN

While you are receiving, Visual Scan allows you to monitor frequencies near the current operating frequency. Visual Scan graphically and simultaneously shows how all frequencies in the selected range are busy. You will see up to 21 segments, for each channel, that represent 7 S-meter levels (3 segments per level).

You will determine the scan range by selecting the center frequency and the number of channels. The default number of channels is 61.

S-meter
level	Mode 1 (31 ch)

■Selecting the Number of Channels

1 Press [MNU] to enter Menu mode.

2 Press [c]/ [d] to select “RADIO (1–)”, then press [OK].

3 Press [c]/ [d] to select “AUX (1–9–)”, then press [OK].

4 Press [c]/ [d] to select “VISUAL SCAN (1–9–2)”, then press [OK].

9

7

6

5

4

3

2

1

Cursor

Frequency channel

Move the cursor to this position to receive this signal

5Press [c]/ [d] to select 31, 61 (default), 91, or 181.

6Press [OK] to complete the setting.

7Press [MNU] to exit Menu mode.

Mode 2 (61 ch)

7

6

5

4

3

2

1

47