Kenwood TM-D700 E instruction manual Automatic Dialer, Storing a Dtmf Number in Memory

AUTOMATIC DIALER

If you use the 10 dedicated memory channels to store DTMF numbers, you need not remember a long string of digits.

■Storing a DTMF Number in Memory

Note: Audible DTMF tones from other transceivers near you (or from your own speaker) may be picked up by your microphone. If so, you may fail to correctly program a DTMF number.

1 Press [MNU] to enter Menu mode.

2 Select Menu 1–5–1 (STORE), then press [OK].

3 Press [c]/ [d] to select from channels 0 to 9, then press [OK].

• The display for entering a memory name

6Repeat steps 4 and 5 to enter up to 8 digits.

Switches among the sets of alphanumeric characters, accented letters (TM-D700E only), and special ASCII characters.

Switches between	Cancels Memory
small and capital	Name Entry.
letters.
Deletes the digit at	Causes the cursor
which the cursor is	to move backward.
blinking.

Inserts the			Clears all digits
currently selected			and backs the
character.	(left BAND cursor to the first
		SEL)	digit.

7Press [OK].

• The cursor moves to the start of the next field.

12

appears; the first digit blinks.

•To skip naming the channel, press [OK] again. You can jump to step 8.

4Turn the Tuning control to select a character.

•You can enter alphanumeric characters plus special ASCII characters.

5Press [a].

•The cursor moves to the next digit.

8Press the keys in sequence on the Mic keypad to enter a DTMF number with up to 16 digits.

•You may turn the Tuning control then [a] to select each digit. Select a space if you want to include a pause.

9Press [OK] to complete the programming.

10Press [MNU] to exit Menu mode.

You can confirm the stored DTMF number by using steps 1 to 3.

The keypad on the MC-53DM also is available to enter alphanumeric characters in step 4. See page 18.

60