Sharp CD-CH1500 General Control, Basic Operation, Demonstration mode, Display brightness 2 levels

Page 13

General Control

■ Demonstration mode

The first time the unit is plugged, the unit will enter the demonstration mode. You will see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-by mode (demonstration mode), press the DEMO button. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the DEMO button again.

■ Opening and closing the control panel

The control panel is motorized.

The control panel automatically opens when the power is turned on, and closes when the unit is set to the power stand-by mode.

When the power is turned on, you can open or close the control panel by pressing the control panel open/close 7 button.

Caution:

● Do not push the control panel while it is opening or closing.

● Do not press buttons on the control panel strongly. The hinge of the panel may be broken.

● Be careful not to jam your fingers in the control panel.

■ Display brightness (2 levels)

You can switch the display brightness by pressing the DIMMER button.

DIMMER OFF

DIMMER ON

Basic Operation

– General Control –

13

Image 13

Contents CD-CH1500 Special Notes Explanation of Graphical SymbolsImportant Instruction Special NotesImportant Safeguards Important SafeguardsAccessories ContentsVolume control PrecautionsGeneral Care of compact discsControls and Indicators Controls and IndicatorsFront panel Rear panel Multi-function LCD displayFM/AM Antenna Jack Auxiliary Input Jacks Remote control Woofer Subwoofer Terminals Tweeter Speaker systemSubwoofer Bass Reflex Duct Main Speaker TerminalsPreparation for Use System ConnectionsSystem Connections AM loop antennaRemove the transport screw Connecting the AC power cordSpeaker connection FM/AM loop antenna connectionBattery installation Remote ControlTest of the remote control Remote ControlGeneral Control Demonstration modeBasic Operation Opening and closing the control panelBass control Sound ControlEqualizer Sound ControlOperation Setting the ClockBasic ClockCD Playback Listening to a CD CDsListening to a CD CDs To locate the desired portion To locate the beginning of a trackTo specify a disc to Play Switching the time displayRepeat or Random Play Advanced CD PlaybackProgrammed Play Programmed PlayListening to the Radio Auto tuningRadio Listening to the RadioListening to the memorized station To scan the preset stationsMemorizing a station To recall a memorized stationTape Playback Listening to a Cassette TapeListening to a Cassette Tape Fast forward/rewind on side aRecording Recording from a CDRecording from a CD Erasing recorded tapes Recording from the RadioRecording from the Radio To interrupt recordingAdvanced Features Timer and Sleep OperationTimer playback or Timer recording Timer and Sleep OperationWhen the timer end time is reached, the system will enter To check the setting timePower stand-by mode automatically Adjust the volume using the Volume buttonsTo cancel the sleep operation To use timer and sleep operation togetherSleep operation To confirm the remaining sleep timeEnhancing Your Stereo System FeaturesAdvanced References Troubleshooting ChartMaintenance Specifications SpecificationsAmplifier SpeakerSharp Electronics Corporation