Sharp CD-CH1500 Recording from the Radio, Erasing recorded tapes, To interrupt recording

Page 24

Recording

Recording from the Radio

– Recording from the Radio –

1 Tune in to the desired station. (See page 20.)

2 Load a cassette into the compartment with side A facing you.

3 Press the REVERSE MODE button to choose one side or both sides.

.... To record on both sides.

.... To record on only one side.

4 Press the REC PAUSE I6 button repeatedly to switch to the side you record on.

●Recording will be paused.

●To record on both sides, begin on side A. (If recording is started from side B, the tape will not switch over to side A.)

5 Press the 06 button to record on side A, or the 1 button for side B.

When you press the 06/1 0 button on the remote control, the system will record on the side specified in step 4.

To interrupt recording:

Press the REC PAUSE I6 button.

To resume recording, press the same button (06 or 1) you pressed in step 5.

To stop recording:

Press the ■ button.

Note:

If you hear a whistling noise while recording an AM station, move the AM loop antenna.

■Erasing recorded tapes

1.Press the TAPE button.

2.Follow steps 2 - 5 in “Recording from the Radio”.

24	■ Listening to the Radio (See page 20.)

Image 24

Contents CD-CH1500 Explanation of Graphical Symbols Special NotesImportant Instruction Special NotesImportant Safeguards Important SafeguardsContents AccessoriesPrecautions Volume controlGeneral Care of compact discsControls and Indicators Controls and IndicatorsFront panel Multi-function LCD display Rear panelFM/AM Antenna Jack Auxiliary Input Jacks Remote control Speaker system Woofer Subwoofer Terminals TweeterSubwoofer Bass Reflex Duct Main Speaker TerminalsSystem Connections Preparation for UseSystem Connections AM loop antennaConnecting the AC power cord Remove the transport screwSpeaker connection FM/AM loop antenna connectionRemote Control Battery installationTest of the remote control Remote ControlDemonstration mode General ControlBasic Operation Opening and closing the control panelSound Control Bass controlEqualizer Sound ControlSetting the Clock OperationBasic ClockListening to a CD CDs CD PlaybackListening to a CD CDs To locate the beginning of a track To locate the desired portionSwitching the time display To specify a disc to PlayRepeat or Random Play Advanced CD PlaybackProgrammed Play Programmed PlayAuto tuning Listening to the RadioRadio Listening to the RadioTo scan the preset stations Listening to the memorized stationMemorizing a station To recall a memorized stationListening to a Cassette Tape Tape PlaybackListening to a Cassette Tape Fast forward/rewind on side aRecording from a CD RecordingRecording from a CD Recording from the Radio Erasing recorded tapesRecording from the Radio To interrupt recordingTimer and Sleep Operation Advanced FeaturesTimer playback or Timer recording Timer and Sleep OperationTo check the setting time When the timer end time is reached, the system will enterPower stand-by mode automatically Adjust the volume using the Volume buttonsTo use timer and sleep operation together To cancel the sleep operationSleep operation To confirm the remaining sleep timeFeatures Enhancing Your Stereo SystemAdvanced Troubleshooting Chart ReferencesMaintenance Specifications SpecificationsAmplifier SpeakerSharp Electronics Corporation