Sharp CD-CH1500 Timer and Sleep Operation, Advanced Features, Timer playback or Timer recording

Page 25

Timer and Sleep Operation

Timer playback:

The unit turns on and plays the desired source (CD, tuner, tape) at the preset time.

Timer recording:

The unit turns on and starts recording from the tuner at the preset time.

Sleep operation:

The radio, compact disc and cassette tape can all be turned off automatically.

Timer playback or Timer recording

Before setting the timer:

While the power is in the stand-by mode, press the DISPLAY button on the remote control to check that the clock is on time.

1 Press the POWER button to turn the power on.

2 Press the MENU button.

3 Turn the jog dial to select “TIMER PLAY” or “TIMER REC” mode and within 10 seconds, press the ENTER button.

 

For timer playback:

 

For timer recording:

 

 

 

 

 

 

 

 

 

 

 

4 PLAY” or “ REC” will flash for 5 seconds. Press the ENTER button during the flash.

or

5 Turn the jog dial to specify the hour to start and within 10 sec- onds, press the ENTER button.

Advanced Features

– Timer and Sleep Operation –

The illustrations show the timer playback setting.

Continued to the next page

Setting the Clock (See page 15.)

25

Image 25
Contents CD-CH1500 Special Notes Explanation of Graphical SymbolsImportant Instruction Special NotesImportant Safeguards Important SafeguardsAccessories ContentsVolume control PrecautionsGeneral Care of compact discsControls and Indicators Controls and IndicatorsFront panel Rear panel Multi-function LCD displayFM/AM Antenna Jack Auxiliary Input Jacks Remote control Woofer Subwoofer Terminals Tweeter Speaker systemSubwoofer Bass Reflex Duct Main Speaker TerminalsPreparation for Use System ConnectionsSystem Connections AM loop antennaRemove the transport screw Connecting the AC power cordSpeaker connection FM/AM loop antenna connectionBattery installation Remote ControlTest of the remote control Remote ControlGeneral Control Demonstration modeBasic Operation Opening and closing the control panelBass control Sound ControlEqualizer Sound ControlOperation Setting the ClockBasic ClockCD Playback Listening to a CD CDsListening to a CD CDs To locate the desired portion To locate the beginning of a trackTo specify a disc to Play Switching the time displayRepeat or Random Play Advanced CD PlaybackProgrammed Play Programmed PlayListening to the Radio Auto tuningRadio Listening to the RadioListening to the memorized station To scan the preset stationsMemorizing a station To recall a memorized stationTape Playback Listening to a Cassette TapeListening to a Cassette Tape Fast forward/rewind on side aRecording Recording from a CDRecording from a CD Erasing recorded tapes Recording from the RadioRecording from the Radio To interrupt recordingAdvanced Features Timer and Sleep OperationTimer playback or Timer recording Timer and Sleep OperationWhen the timer end time is reached, the system will enter To check the setting timePower stand-by mode automatically Adjust the volume using the Volume buttonsTo cancel the sleep operation To use timer and sleep operation togetherSleep operation To confirm the remaining sleep timeEnhancing Your Stereo System FeaturesAdvanced References Troubleshooting ChartMaintenance Specifications SpecificationsAmplifier SpeakerSharp Electronics Corporation