Menu system
In Standby mode
Security Code
Because authorization by the Security Code is required when it’s removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft.
•When the Security Code function is activated, the code can’t be changed and the function can’t be released. Note, the Security Code can be set as the 4 digit number of your choice.
1Enter Standby
Press the [SRC] button. Select the "STANDBY" display.
2Enter Menu mode
Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security" is displayed.
3Enter Security Code mode Press the [MENU] button.
When "ENTER" is displayed, "CODE" is displayed.
4Select the digits to enter Press the [AUDIO] knob.
•This function can be used the [FM] / [AM] button.
5Select the Security Code numbers Turn the [4] / [¢] knob.
6Repeat steps 4 and 5, and complete the Security Code.
7Confirm the Security Code
Press the [AUDIO] knob for at least 3 seconds. When
8Do the step 4 through 7 operation, and reenter the Security Code.
"APPROVED" is displayed.
The Security Code function activates.
•When the wrong Code is entered in steps 4 through 6, repeat from step 4.
28 English
Press the Reset button and when it’s removed from the battery power source
1Turn the power ON.
2Do the step 4 through 7 operation, and enter the Security Code.
"APPROVED" is displayed. The unit can be used.
Touch Sensor Tone
Setting the operation check sound (beep sound) ON or OFF.
Display | Setting |
"Beep ON" | Beep is heard. |
"Beep OFF" | Beep canceled. |
Manual Clock Adjustment
1 Select Clock Adjustment mode
Press the [AUDIO] knob.
Select the "Clock Adjust" display.
• This function can be used the [FM] / [AM] button.
2 Enter Clock Adjust mode
Press the [MENU] button.
The time indicator (hours) is blinks.
3 Select the item (hours or minutes)
Press the [AUDIO] knob.
• This function can be used the [FM] / [AM] button.
4 Adjust the hours or minutes Turn the [4] / [¢] knob.
5 Exit Clock adjustment mode Press the [MENU] button.
Clock Display
Setting the clock display ON or OFF.
Display | Setting |
"Clock ON" | The clock are displayed. |
"Clock OFF" | The clock aren’t displayed. |
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.
Display | Setting |
"DSI ON" | LED flashes. |
"DSI OFF" | LED OFF. |
Selectable Illumination
Selecting the button illumination color as green or red.
Display | Setting |
"Button Red" | The illumination color is red. |
"Button Green" | The illumination color is green. |
Contrast Adjustment
Adjusting the display contrast.
Display and Setting
"Contrast 0"
…
"Contrast 7" (Original setting)
…
"Contrast 10"
Dimmer
Dimming this unit’s display automatically when the vehicle light switch is turned ON.
Display | Setting |
"Dimmer ON" | The display dims. |
"Dimmer OFF" | The display doesn’t dim. |
System Q Setting
Setting whether the display indicates the System Q factors (Bass center frequency, Bass Q factor, Bass extend, Middle center frequency, Middle Q factor, and Treble center frequency) in Audio control.
Display | Setting |
"SystemQ ON" | The System Q factors are displayed. |
"SystemQ OFF" | The System Q factors aren’t displayed. |
In Standby mode
Built-in Amp Mute Setting
Toggles ON or OFF the mute control on the built- in amplifier.
Turning ON this control enhances the preout quality.
Display | Setting |
"AMP Mute OFF" | The |
"AMP Mute ON" | The |
In
Dual Zone System
Makes the sound different for the front channel and rear channel.
Display | Setting |
"Zone2 OFF" | The front and rear are the same source sound. |
"Zone2 ON" | The front and rear are the different source sound. |
•When the Dual Zone System is on, there is only sound effect including Audio control for except selected source.
•When you set the Dual zone system to ON while the sub woofer preout is switched ON, the sound of the sub woofer preout isn’t output.
When the Dual Zone System is OFF
Dual Zone System Setting
Setting the Front channel and Rear channel sound in the Dual Zone System.
Display | Setting |
"Zone2 Rear" | The front is except the rear selected source, and |
| the rear is selected source sound. |
"Zone2 Front" | The rear is except the front selected source, and |
| the front is selected source sound. |
| English 29 |