| Installation | |
English | ■ Removing the hard rubber frame | |
1 Engage the catch pins on the removal tool and remove the two | ||
| ||
| locks on the lower level. | |
| Lower the frame and pull it forward as shown in the figure. | |
| Catch | |
| Lock |
Accessory1
Removal tool
2When the lower level is removed, remove the upper two locations.
NOTE
The frame can be removed from the top side in the same manner.
■Removing the Unit
1Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.
2Remove the
3Insert the two removal tools deeply into the slots on each side, as shown.
Screw (M4X8) | Catch facing up | |
(commercially | ||
| ||
available) |
|
(Accessory4 : North & South America sales area only.)
4Lower the removal tool toward the bottom, and pull
out the unit halfway whilst pressing towards the inside.
2CAUTION
Be careful to avoid injury from the catch pins on the removal tool.
5Pull the unit all the way out with your hands, being careful not to drop it.
— 12 —