Kenwood KRC-108S instruction manual Ec4/dB Sound Coordinate, Clock display, Adjusting Time

Page 7

"FD": Adjust the fader level.

Setting values: Front 15 - Rear 15

ec4/dB (Sound Coordinate)

You can recall the best audio setting preset for different types of the music.

1Press the AUD button to enter the Sound Coordinate mode.

2Press a preset button (#1-5).

The preset settings of the bass and treble tones are recalled. #1: Flat

#2: Rock

#3: Pops/Top 40

#4: Jazz

#5: Easy

3Press the AUD button to end the sound coordinate mode.

NOTE

You can call the following settings with this function; bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level setting.

Clock display

Turning clock display On/Off:

Each time you press the CLK button, the display switches between the clock and each mode display.

Adjusting Time

Adjust the time.

1When the time is not displayed, first press the CLK button to display the time.

2Press the CLK button for at least two seconds to enter the clock adjustment mode. The time display will blink.

3• Adjusting the hours

Press the BAND button to advance the hours.

Adjusting the minutes

Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back.

4Press the CLK button to end the clock adjustment mode.

— 7 —

Image 7
Contents KRC-108S Contents To prevent injury or fire, take the following precautions Safety precautionsCleaning the Tape Head Cleaning the UnitHandling Cassette Tapes Power General featuresSwitching Modes Loudness VolumeAudio Control Setting AttenuatorClock display Adjusting TimeFD Adjust the fader level Ec4/dB Sound CoordinateRecalling a Preset Station Tuner featuresTuning Station Preset MemoryAuto Memory Entry Clean Reception System Circuit CrscTurning Crsc On/Off Playing Cassette Tapes Cassette player featuresFast Forwarding and Rewinding Cassette Tapes Turning Tuner Call On/Off Tuner CallInstallation Procedure AccessoriesACC Connecting Wires to TerminalsInstalling in Japanese-Made Cars InstallationRemoving the Unit Removing the hard rubber frameProblem Possible Cause Solution Troubleshooting GuideAudio section SpecificationsAM tuner section Cassette player sectionPage