Alpine CDA-9883 owner manual Indication for CD Player, Indication for CD Changer, 29-EN

Page 31

Indication for CD Player

•Protective circuit is activated due to high temperature.

-The indication will disappear when the temperature returns to normal operating range.

•No CD is inserted.

-Insert a CD.

•Although a disc is inserted, “No Disc” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps:

Press the button again for at least 2 seconds.

If the disc still does not eject, consult your Alpine dealer.

•Mechanism error.

1) Press the button and eject the CD.

If not ejecting, consult your Alpine dealer.

2) When the error indication remains after ejecting, press the button again.

If the error indication still does not turn off after pressing the button for a few times, consult your Alpine dealer.

•When “Error” is displayed:

If the disc cannot be ejected by pressing , press the RESET switch (refer to page 7) and press again.

If the disc still cannot be ejected, consult your Alpine dealer.

•A copy-protected WMA file was played back.

-You can only play back non-copy-protected files.

•A sampling rate/bit rate not supported by the unit is used.

-Use a sampling rate/bit rate that is supported by the unit.

Indication for CD Changer

•Protective circuit is activated due to high temperature.

-The indication will disappear when the temperature returns to normal operating range.

•Malfunction in the CD Changer.

-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.

Check the indication. Insert the magazine again.

If the magazine cannot be pulled out, consult your Alpine dealer.

•Magazine ejection not possible.

-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.

•A disc is left inside the CD Changer.

-Press the eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.

•No magazine is loaded into the CD Changer.

-Insert a magazine.

•No indicated disc.

-Choose another disc.

Indication for SAT Receiver Mode

•The XM or SIRIUS antenna is not connected to the XM or SIRIUS radio module.

-Check whether the XM or SIRIUS antenna cable is attached securely to the XM or SIRIUS radio module.

•Radio is being updated with latest encryption code.

-Wait until encryption code is being updated. Channels 0 and 1 should function normally.

(XM mode)

(SIRIUS mode)

(ACQUIRING is displayed after ACQUIRING SIGNAL has been scrolled once.)

•XM or SIRIUS signal is too weak at the current location.

-Wait until the car reaches a location with a stronger signal.

•Radio is acquiring audio or program information.

-Wait until the radio has received the information.

(XM mode)

(SIRIUS mode)

(ACQUIRING is displayed after ACQUIRING SIGNAL has been scrolled once.)

•The channel currently selected has stopped broadcasting. - Select another channel.

29-EN

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CDA-9883 Page Contents Operating Instructions Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Press SOURCE/ to turn on the unit Turning Power On and OffGetting Started Then pull To removeInitial System Start-Up Adjusting VolumeLowering Volume Quickly Setting TimeRadio Presetting Stations ManuallyPresetting Stations Automatically Tuning to Preset StationsFrequency Search Function Receiving the Multicast Station Program ServiceRepeat Play Playback10-EN 11-EN Press 5 in the play or pause modeX. Random Play Searching from CD Text12-EN File Name Search mode Press To select another FolderQuick Search About MP3/WMA/AAC13-EN TerminologySetting the Bass Control Sound SettingLeft and Right/Fader Between Front Rear/Defeat Setting the Treble Level Setting the Treble ControlAdjusting the High Pass Filter Setting the Treble Center FrequencyAbout the indication display Other FunctionsDisplaying the Text 16-ENAbout Text Turn the Rotary encoder to change the settingDisplaying Time 17-ENVisual Customizing Sound Customizing18-EN 19-EN General SettingHD Radio Only when HD Radio is connected External Device20-EN SAT Radio Receiver OptionalReceiving Channels with the SAT Radio Receiver Optional Checking the SAT Radio ID NumberStoring the desired Sports Team Sirius only Storing Channel PresetsGame Alert Setup Receiving Stored ChannelsSearch Function Canceling the stored Alert Memory Sirius onlyQuick Search Function Changing the Display Setting the Auxiliary Data Field DisplayReceiving Weather or Traffic Information from SAT Radio Instant Replay Function Sirius onlySearching for a desired Song IPod Optional24-EN 25-EN Direct Search FunctionTurn the Rotary encoder to select a song and press / /ENT 26-EN Random Play Shuffle M.I.XMulti-Changer Selection Optional Changer OptionalControlling CD Changer Optional Playing MP3 Files with the CD Changer OptionalCase of Difficulty Information29-EN Indication for SAT Receiver ModeIndication for CD Player Indication for CD ChangerIndication for iPod Mode Specifications30-EN 31-EN Installation and Connections32-EN InstallationRemoval 33-ENPull the unit out, keeping it unlocked as you do so 34-EN Connections35-EN Page This Warranty does not cover the following Limited Warranty
Top Page Image Contents