Alpine CDA-9883 owner manual 35-EN

Page 37

Antenna Receptacle

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

•This lead should be used only for controlling the vehicle’s power antenna. Do not use this lead to turn on an amplifier, or a signal processor, etc.

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

Audio Interrupt In Lead (Pink/Black)

Connect this lead to the Audio interface output of a cellular phone which provides ground shorting when a call is received.

Illumination Lead (Orange)

This lead may be connected to the vehicle’s instrument cluster illumination lead. This will allow the backlighting of the CDA-9883 to dim whenever the vehicle’s lights are turned on.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s battery.

Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

Power Supply Connector

Right Front (+) Speaker Output Lead (Gray) Right Front (–) Speaker Output Lead (Gray/Black) Right Rear (–) Speaker Output Lead (Violet/Black) Right Rear (+) Speaker Output Lead (Violet)

Left Rear (+) Speaker Output Lead (Green)

Left Rear (–) Speaker Output Lead (Green/Black) Left Front (–) Speaker Output Lead (White/Black) Left Front (+) Speaker Output Lead (White)

Fuse Holder (10A)

Ai-NET Connector

Connect this to the output or input connector of another device (CD Changer, Equalizer, HD Radio™ TUNER MODULE, etc.) equipped with Ai-NET.

•Interface adapter for iPodTM (KCA-420i) is not recommended for use with this product.

•You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) to this component.

Steering Remote Control Interface Connector

To steering Remote control interface box.

Rear Output RCA Connectors

RED is right and WHITE is left.

Front Output RCA Connectors

RED is right and WHITE is left.

Subwoofer RCA Connectors

RED is right and WHITE is left.

Ai-NET Cable (Included with CD Changer)

RCA Extension Cable (sold separately)

iPod Direct Connector

Control iPod signals

Connect this to an iPod or to an optional Bluetooth Box. To use a hands-free mobile phone, an optional Bluetooth Box connection is required. For details on connection, refer to the Owner’s Manual of the Bluetooth Box.

FULL SPEED™ Connection Cable (KCE-422i) (sold separately)

System Switch

When connecting a processor or divider using Ai-NET, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

•Be sure to turn the power off to the unit before changing the switch position.

To prevent external noise from entering the audio system.

•Locate the unit and route the leads at least 10 cm away from the car harness.

•Keep the battery power leads as far away from other leads as possible.

•Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

35-EN

Page 36 Page 38
Image 37
Page 36 Page 38
Contents CDA-9883 Page Contents Operating Instructions Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Getting Started Turning Power On and OffThen pull To remove Press SOURCE/ to turn on the unitLowering Volume Quickly Adjusting VolumeSetting Time Initial System Start-UpPresetting Stations Automatically Presetting Stations ManuallyTuning to Preset Stations RadioFrequency Search Function Receiving the Multicast Station Program ServiceRepeat Play Playback10-EN X. Random Play Press 5 in the play or pause modeSearching from CD Text 11-ENQuick Search File Name Search mode Press To select another FolderAbout MP3/WMA/AAC 12-EN13-EN TerminologySetting the Bass Control Sound SettingLeft and Right/Fader Between Front Rear/Defeat Adjusting the High Pass Filter Setting the Treble ControlSetting the Treble Center Frequency Setting the Treble LevelDisplaying the Text Other Functions16-EN About the indication displayDisplaying Time Turn the Rotary encoder to change the setting17-EN About TextVisual Customizing Sound Customizing18-EN HD Radio Only when HD Radio is connected General SettingExternal Device 19-ENReceiving Channels with the SAT Radio Receiver Optional SAT Radio Receiver OptionalChecking the SAT Radio ID Number 20-ENGame Alert Setup Storing Channel PresetsReceiving Stored Channels Storing the desired Sports Team Sirius onlySearch Function Canceling the stored Alert Memory Sirius onlyQuick Search Function Receiving Weather or Traffic Information from SAT Radio Setting the Auxiliary Data Field DisplayInstant Replay Function Sirius only Changing the DisplaySearching for a desired Song IPod Optional24-EN 25-EN Direct Search FunctionTurn the Rotary encoder to select a song and press / /ENT 26-EN Random Play Shuffle M.I.XControlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalCase of Difficulty InformationIndication for CD Player Indication for SAT Receiver ModeIndication for CD Changer 29-ENIndication for iPod Mode Specifications30-EN 31-EN Installation and Connections32-EN InstallationRemoval 33-ENPull the unit out, keeping it unlocked as you do so 34-EN Connections35-EN Page This Warranty does not cover the following Limited Warranty
Top Page Image Contents