Monaural mode
When FM signals become weak, or FM reception becomes poor, the unit automatically switches to Monaural mode to reduce noise.
Local mode
Local mode allows you to tune in only to strong stations during Seek Tuning.
1Press LO before you start seek tuning.
“LO” appears in the display.
To return to Distant mode, press LO again.
“LO” disappears and the unit tunes in to all receivable stations.
Using preset stations
You must preset stations before you can tune in to a station using preset station number buttons.
i/k | PS/A.ME | Preset station buttons 1 to 6 |
BAND
Presetting stations manually
(Manual Memory)
1Press BAND repeatedly to select the desired band (FM1, FM2, FM3, AM1, or AM2).
2Press i or k to tune in to a desired station (see “Tuning in to a station” as well for another tuning method).
3Press and hold the desired preset station button until the unit beeps.
Note
A newly preset station replaces the station on the same band that was previously stored on that preset station button.
Tuning in to a preset station
1Press BAND repeatedly to select the desired band (FM1, FM2, FM3, AM1 or AM2).
2Press the preset station button on which the desired station is stored.
Active tuning reception control (ATRC)
The unit automatically suppresses FM noise caused by vehicle movement, and maintains sound quality.
Preset station number
Presetting stations automatically
(Auto Memory)
1Press BAND repeatedly to select the desired band (FM1, FM2, FM3, AM1, or AM2).
2Press and hold PS/A.ME until automatic presetting starts.
The unit automatically stores up to 6 stations for each band.
After completion of automatic presetting, the unit tunes in to the station stored on preset station
button 1.
To cancel automatic presetting, press PS/A.ME again.
Checking the preset stations (Preset Scan)
1Press PS/A.ME briefly.
Each preset station will be tuned in for 5 seconds in
order.
To cancel Preset Scan, press PS/A.ME again or any
preset station button.
CD PLAYER OPERATION
Playing a CD
You can play CDs,
SRC |
| z |
|
|
|
|
|
|
r/t | INT RNDM |
| REP 1 |
1Insert a CD.
“CD” appears on the display. CD play starts.
If a CD is already inserted, press SRC repeatedly to select CD play mode.
In normal play, when the last track finishes, the unit returns to the first track and continues to play.
ENGLISH 4