Aiwa CDC-X527M operating instructions Other Functions, Card Remote Control

Page 7

OTHER FUNCTIONS

AUDIO SRC

CONTROL

Changing the key illumination color

You can choose blue or red as the key illumination color.

1Press and hold SRC until “ILL” appears on the display.

2Turn AUDIO CONTROL to select “1 (for blue)” or “2 (for red).”

Setting the dimmer of the display

1Press and hold SEL until “D” appears on the display.

2Turn AUDIO CONTROL to select “0 (bright)” or “1 (dimmed).”

CARD REMOTE

CONTROL

Names of parts

BAND TAPE

CD CD-CH

SKIP

REWFF

TUNING / DISC

UP

DOWN

VOLUME

1BAND button

2TAPE button (This button is not available with this unit.)

3CD button

4CD-CH button (CD changer only)

5SKIP f/REW button

6SKIP g/FF button

7PS (preset) button

8TUNING/DISC UP/DOWN buttons

9VOLUME +/- buttons

Preparations

A lithium battery is installed in the remote control at the factory.

Before you use the remote control, be sure to remove the insulating sheet by simply pulling it out.

Remote control (back)

Insulating sheet

Replacing the battery

1Insert the tip of a pointed object Ainto the hole B and pull out the battery holder to remove the lithium battery (CR2025).

Remote control (back)

Battery holder

2Install a new lithium battery (CR2025) with the ) side facing up in the battery holder.

3Push the battery holder into the unit until it clicks.

CAUTION

Keep the lithium battery out of the reach of children. If swallowed, consult a doctor immediately.

To prevent a short circuit, never pinch the battery with pliers, etc.

ENGLISH 6

Image 7
Contents CDC-X527M YU Table of Contents PrecautionsTheft Protection Basic Operation Audio and Clock AdjustmentRadio Operation CD Player Operation Random Play Auxiliary EquipmentIntro Play One track Repeat PlayOther Functions Card Remote ControlCD Changer Operation TroubleshootingCleaning the connector MaintenanceSpecifications Cleaning the front panelPage Page Page Page Page Page