Aiwa CDC-X527M operating instructions CD Changer Operation, Troubleshooting

Page 8

CD CHANGER

OPERATION

Playing a CD

You can play CDs from a connected AIWA CD Changer. For detailed information on installing a CD Changer, refer to the Installation and Connection manual supplied with the CD Changer.

DISCN/DISCM

r/t

SRC

INT RNDM REP

 

 

REP 1

 

CD number

Track number

CD Changer indicator

1Press SRC repeatedly to display “CD-CH.” The CD Changer play starts.

One track Repeat Play

You can play a track repeatedly.

1Press REP1 during CD Changer play.

“REPEAT1” appears on the display.

To cancel Repeat Play, press REP1 again.

One disc Repeat Play

You can play all tracks on a disc repeatedly.

1Press REP during CD Changer play.

“REPEAT” appears on the display.

To cancel Repeat Play, press REP again.

One disc Random Play

You can play all the tracks on a disc in random order.

1Press RNDM during CD Changer play.

“RANDOM” appears on the display.

To cancel Random Play, press RNDM again.

Note

Pressing rduring Random Play locates the beginning of the current track. The unit does not retrieve previous tracks during Random Play.

TROUBLESHOOTING

Error code (when using the optional AIWA CD Changer)

In the following cases the corresponding error code indication appears. Follow the suggestions below to solve such problems. If the error code indication does

To

Skip to the next track

Skip back to the beginning of the current track or to the previous track

Advance rapidly to locate a desired point

Press

t

r

and hold t, then release it at the desired point

not disappear, consult an AIWA service center.

E01 The disc magazine is not properly inserted in the CD Changer. Reinsert the magazine. Refer to the instruction manual for the CD Changer.

E02 No CDs are loaded in the disc magazine. Insert CDs properly. Refer to the instruction manual for the CD Changer.

Reverse rapidly to locate a

and hold r, then

desired point

release it at the

 

desired point

 

 

Start CD Changer play from

DISCN

the first track on the next disc

 

 

 

Start CD Changer play from

DISCM

the first track on the previous

 

disc

 

 

 

Intro Play

You can locate a desired track by monitoring the first 10 seconds of all the tracks on the CDs in the disc magazine.

1Press INT during CD Changer play. “SCAN” appears on the display.

2Press INT again when the desired track is played. The unit returns to normal CD play.

E03 Focus error. Check that the discs are loaded properly in the disc magazine (right side up, etc.).

E04 Problem with the CD Changer. Reset the unit by pressing the reset button. If this does not solve the problem, consult an AIWA service center.

Reset button

If a CD does not operate properly, press the reset button with a pointed object such as a pencil, etc. Note that all your settings will be erased if this button is pressed.

Reset button

7 ENGLISH

Image 8
Contents CDC-X527M YU Precautions Table of ContentsBasic Operation Audio and Clock Adjustment Theft ProtectionRadio Operation CD Player Operation Auxiliary Equipment Intro PlayOne track Repeat Play Random PlayCard Remote Control Other FunctionsTroubleshooting CD Changer OperationMaintenance SpecificationsCleaning the front panel Cleaning the connectorPage Page Page Page Page Page