Listening to a CD or MP3/WMA disc (continued)
Note:
If a disc tray with no disc is selected, playback will not start and the disc indicator will disappear.
To stop playback: Press the 
(CD 
) button.
QDirect track search
By using the numeric buttons, the desired tracks on the current disc can be played.
Use the numeric buttons on the remote control to select the desired track while playing the selected disc.
OThe numeric buttons allow you to select up to number 9.
OWhen selecting number 10 or higher, use the “+10” button.
A. For example, to choose 13
1 Press the “+10” button.
2 Press the “1” and then “3”
button.
Selected track number
QProgrammed play
You can choose up to 32 selections for playback in the order you like.
1While in the stop mode, press the MEMORY button to enter the programming save mode.
2Press one of the 
1 - 
5 buttons to select the desired disc.
3Press the numeric buttons on the remote control or 
or 
button to select the desired track.
4Press the MEMORY button 
to save the track number.
5Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed. If you want to check the programmed
B. For example, to choose 130
1Press the “+10” button twice.
2Press the “1”, “3” and “0” button.
Notes:
OA track number higher than the number of tracks on the disc cannot be selected.
ODuring random play, direct search is not possible.
QRepeat play
Repeat play can play all 5 discs, all tracks on a chosen disc, single track on a chosen disc, or a programmed sequence continuously.
To repeat one track:
Press the PLAY MODE button once. Press the 
button.
To repeat one disc:
Press the PLAY MODE button twice. Press the 
(CD 
) button.
To repeat all tracks on up to 5 discs:
Press the PLAY MODE button 3 times. Press the 
(CD 
) button.
To repeat desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page 8 and then press the PLAY MODE button.
To cancel repeat play:
Press the PLAY MODE button again until “ 
” disappear.
QRandom play
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks on up to 5 discs:
Press the PLAY MODE button for 2 seconds on the remote
control and then press the 
(CD 
) button.
To cancel random play:
Press the PLAY MODE button. “R” will disappear.
Notes:
OIf you press the 
button during random play, you can move to the next track by the random operation. On the
other hand, the 
button does not allow you to move to the previous track. The beginning of the track being played will be located.
OIn random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the 
(CD 
) button. Otherwise, the disc(s) will play continuously.
tracks, press the MEMORY button repeatedly.
If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button.
6Press the 
(CD 
) button to start playback.
QProgrammed play (MP3/WMA)
1 While in the stop mode, 
press the MEMORY button to enter the programing save mode.
2Press one of the 
1 - 
5 buttons to select the desired disc.
3 Press the PRESET
( 
or 
) button on the remote control to select the desired folder.
Then press the 
or
button on the remote control to select the desired tracks.
4Press the MEMORY button to save the folder and track number.
5Repeat steps 3 - 4 for other folder/tracks. Up to 32 tracks can be programmed.
6Press the 
(CD/USB 
) button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the 
(CD 
) button. The display will show “MEM CLEAR” and all the programmed contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the “MEMORY” indicator will be displayed.
Press the MEMORY button repeatedly to go to the last program memory. Then follow steps 2 - 4 to add tracks. The new tracks will be stored after the last track of the previous program.
Notes:
OWhen a disc is ejected, the program is automatically canceled.
OIf you press the
ODuring the program operation, random play is not possible.