Pure Digital SONUS-1XT manual Tuning, Autotune full

Page 15

Tuning

Tuning SONUS-1XTis very simple. When you first switch on it automatically finds all the stations available in your area. You may want to re-tune if you move your radio to a different room or if you want to receive a new multiplex. Multiplexes, sometimes called ensembles, are groups of stations owned and broadcast by a single operator. You can re-tune your SONUS-1XTat any time using the following three tuning options:

Autotune UK

Scans all UK frequencies. This should only take a few seconds.

Autotune full

Scans the full frequency range in Band III. This is useful if you use your SONUS-1XToutside the UK and may take a minute or more.

Manual tune

Shows signal level, which you can use to find the best position for your radio and aerial.

1.Turn the Tune knob to scroll through different channels and push to choose one (UK stations are in channels 11B to 12D). You see a signal level display.The empty block indicates the minimum required level for reception and the filled blocks indicate the current level.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Controls and Connectors Standby press to switch between standby mode and power on Quick start Adjust the volume control if requiredTo hear Using your SONUS-1XTIVOX Making your radio speak Stations onlySpelling scrolling text Setting alarms Cancelling alarms Setting a sleep time SONUS-1XTwill switch off or to change the sleep time againYou will see a Sleep icon on the display Recording from your SONUS-1XT Page Setup options Station orderAlphanumeric Displays all stations in alphanumeric order Audio settings Display settingsTurn the Tune knob and push to set VET On or Off DRC 1 Applies the DRC level as sent with the broadcastAutotune full TuningSw version Sw upgradeTurn the Tune knob and push to set the demo mode On or Off Demo modeHints and tips ‹‹/›› Secondary servicesMy alarm/timer didn’t work +44 01923
Top Page Image Contents