Pure Digital SONUS-1XT manual Sw version, Sw upgrade

Page 16

2.Move your aerial while watching the display and to try to raise the current level to the empty block or beyond. Once you have a good signal the display will show the multiplex name and add the stations in that multiplex to the station list.

3.Push the Menu button to exit or turn the Tune knob and push to change channel.

Note You can also display the signal level for a station by pushing the Tune knob.

Sw version

Displays the version number of the software installed in your radio. You may be asked to quote this if you contact Technical Support.

Sw upgrade

You can upgrade the software in your SONUS-1XTusing a PC connected to the USB connection on the rear panel. To install an upgrade, select Sw upgrade and follow the instructions provided with the software. Upgrades may be issued to provide enhanced functions or improve performance. Check our website for details of when software upgrades are available and instructions on how to install them. To exit the Software upgrade menu press the Menu button again.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page Controls and Connectors Standby press to switch between standby mode and power on Adjust the volume control if required Quick startUsing your SONUS-1XT IVOX Making your radio speakStations only To hearSpelling scrolling text Setting alarms Cancelling alarms SONUS-1XTwill switch off or to change the sleep time again Setting a sleep timeYou will see a Sleep icon on the display Recording from your SONUS-1XT Page Station order Setup optionsAlphanumeric Displays all stations in alphanumeric order Display settings Audio settingsDRC 1 Applies the DRC level as sent with the broadcast Turn the Tune knob and push to set VET On or OffTuning Autotune fullSw upgrade Sw versionDemo mode Turn the Tune knob and push to set the demo mode On or Off‹‹/›› Secondary services Hints and tipsMy alarm/timer didn’t work +44 01923
Top Page Image Contents