Pure Digital SONUS-1XT manual Quick start, Adjust the volume control if required

Page 4

Quick start

This section provides information on how to set up and start using your radio.

1

2

3

4

5

Fully extend the aerial, connect the mains adapter and plug in to your power supply.

Push the Standby button to switch the unit on.

The LCD lights up, the radio says ‘Welcome to the PURE SONUS-1XTwith iVOX. Autotune in progress, please wait’ and a progress bar indicates the progress of a full autotune to find the stations available. When finished the number of stations found is announced, the station names are placed in a station list and you hear the first station.

Adjust the volume control if required.

Turn the Tune knob to browse the station list. When you stop the station name will be announced. Push Tune to select and listen to another station.

Push the Info button and repeat to cycle through the optional display modes including the full screen clock.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Controls and Connectors Standby press to switch between standby mode and power on Adjust the volume control if required Quick startUsing your SONUS-1XT IVOX Making your radio speakStations only To hearSpelling scrolling text Setting alarms Cancelling alarms SONUS-1XTwill switch off or to change the sleep time again Setting a sleep timeYou will see a Sleep icon on the display Recording from your SONUS-1XT Page Station order Setup optionsAlphanumeric Displays all stations in alphanumeric order Display settings Audio settingsDRC 1 Applies the DRC level as sent with the broadcast Turn the Tune knob and push to set VET On or OffTuning Autotune fullSw upgrade Sw versionDemo mode Turn the Tune knob and push to set the demo mode On or Off‹‹/›› Secondary services Hints and tipsMy alarm/timer didn’t work +44 01923
Top Page Image Contents