®
Installation and Operating Instructions
Owner’s Reference PowerPlay 8500
UPS Priority
When PowerPlay is connected to a PS Audio PowerPack battery backup you may control how each outlet shuts down in a battery backup situation.
Using the drop box you may select one of the following options:
Low – No battery backup is provided to these outlets in order to quickly reduce the load and extend battery life. Use this setting for amps, subwoofers and other large draw devices.
Normal – Some battery protection is provided, but outlets turn off when UPS reaches 25% battery remaining. Use this setting to safely shut down devices such as projectors or any other device which require some user interaction to properly shut down
Critical – Full battery protection, outlets remain powered until battery runs out. Use this setting for network critical or other devices which need to remain powered as long as possible.
Important: Changes made in the configuration tab must be confirmed by clicking on the Save button at the bottom of the page.
4826 Sterling Drive, Boulder, CO 80301 | Getting Started 21 |
PH: 720.406.8946 service@psaudio.com www.psaudio.com |
©2012 PS Audio International Inc. All rights reserved.