PS Audio 8500 manual Introduction, Important Safety Instructions

Page 3

®Introduction

Owner’s Reference PowerPlay 8500

Important Safety Instructions

Read these instructions Heed all warnings Follow all instructions

WARNING. TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN NOR MOISTURE.

Clean only with a dry cloth.

Do not place flammable material on top of or beneath the component.

The PS Audio PowerPlay 8500 requires adequate ventilation at all times during operation. Please allow a minimum 1/2” space above and below the PowerPlay 8500.

Do not remove nor bypass the ground pin on the end of the AC cord. All PS products ship with a grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time.

When making connections to this or any other component, make sure all components are powered off. Turn off the system’s power before connecting the PS Audio component to any other component. Make sure all cable terminations are of the highest quality.

There are no user serviceable fuses inside this product.

THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS PS AUDIO PRODUCT. REFER ALL SERVICE NEEDS TO QUALIFIED SERVICE PERSONNEL.

Please contact your authorized dealer, your distributor, or PS Audio directly if you have any questions or concerns that are not addressed in this reference manual.

PS Audio™ is a trademarks of PS Audio International Inc., and is restricted for use by PS Audio International, Inc., its subsidiaries, and authorized agents.

4826 Sterling Drive, Boulder, CO 80301

Introduction iii

PH: 720.406.8946 service@psaudio.com www.psaudio.com

 

©2012 PS Audio International Inc. All rights reserved.

Image 3
Contents Introduction Owner’s ReferenceTable Of Contents Introduction Important Safety InstructionsDevice Description Device Features Mounting Installation ConsiderationsGetting Started LocationOverview Determining the Load Installation PlacementVentilation Connect to ACIP Status Configuration Control Web Based Self Test and Power UpLog into your account Control Panel Dealers and Installers only Device List GlobalNet Control Tab GlobalNet Configure Tab Delay Power ToggleSwitch Mode SwitchedProgram Delay RebootAlways On UPS Priority Alerts Performance IR Codes Installation and Operating Instructions Control Panel System Status Internal WebsiteInstallation and Operating Instructions Control Panel Configuration Unit NameZone Name Delayed UPS Priority Control Panel Infrared Codes Control Panel Network Conditions Remedy WarrantyMiscellaneous Outside the US Service If you require service in North AmericaIf you have problems Voltage conversions Your serial number Your purchase informationDate of purchase Sterling Drive, Boulder, CO