PS Audio 8500 manual Program Delay, Reboot, Always On

Page 15

®

Installation and Operating Instructions

Owner’s Reference PowerPlay 8500

Program Delay

The outlet will follow the state of the Power Button after a programmed delay. Note: The Program Delay can only be altered through the web based

interfaces, the default is 3 seconds.

Reboot

The outlet is ALWAYS ON, but may be rebooted through the web interface.

Auto Reboot

The outlet is ALWAYS ON, may be rebooted from the web interface, and automatically reboots when no web connection is detected for 10 minutes. When Auto Reboot is selected you may use the on and off

delays to sequence power of all Auto Reboot outlets.

Always On

The outlet remains on regardless of the state of the Power Button.

4826 Sterling Drive, Boulder, CO 80301

Getting Started 11

PH: 720.406.8946 service@psaudio.com www.psaudio.com

©2012 PS Audio International Inc. All rights reserved.

Image 15
Contents Introduction Owner’s ReferenceTable Of Contents Introduction Important Safety InstructionsDevice Description Device Features Mounting Installation ConsiderationsGetting Started LocationOverview Determining the Load Installation PlacementVentilation Connect to ACIP Status Configuration Control Web Based Self Test and Power UpLog into your account Control Panel Dealers and Installers only Device List GlobalNet Control Tab GlobalNet Configure Tab Delay Power ToggleSwitch Mode SwitchedProgram Delay RebootAlways On UPS Priority Alerts Performance IR Codes Installation and Operating Instructions Control Panel System Status Internal WebsiteInstallation and Operating Instructions Control Panel Configuration Unit NameZone Name Delayed UPS Priority Control Panel Infrared Codes Control Panel Network Conditions Remedy WarrantyMiscellaneous Outside the US Service If you require service in North AmericaIf you have problems Voltage conversions Your serial number Your purchase informationDate of purchase Sterling Drive, Boulder, CO