Save Your Preset Stations

Local and distance reception setting can facilitate the radio reception, depending on the location in which the radio is being used. You also can choose LOC ON or OFF pressing the LOC/RDM button on the RC.

There are six numbered preset buttons, which can store and recall stations for each band. While listening to a radio station you would like to save as a pre-set, press and hold one of the buttons numbered 1-6 until you hear a beep. The button you pressed is now the pre-set button for that station.

Automatic Store/Preset Scan

A. Automatic Scan & Store

While listening to the FM Radio, press and hold the AMS/RPT Button for 3 seconds. The receiver will automatically scan and save stations for all the 3 FM Bands, whichever band (FM1, 2 or 3) you are listening to. While listening to the AM Radio, press and the AMS/RPT Button for 3 seconds. The receiver will automatically scan and save stations for the 2 AM Bands, whichever band (AM1 or 2) you are listening to.

B. Scan Saved Stations

Press the APS button or the AMS button on the remote control once to perform the scanning functions.

In FM mode, press the APS button or the AMS/RPT button and the stations in FM band will be scanned; press the button in AM mode and scan the band stations of AM Band.

TA (Traffic Alarm) function

Briefly press the TA button to turn on or turn off the TA function.

When TA is enabled (on), the tuner starts searching the traffic announcement.

AF (Alternative Frequencies) function

Briefly press the AF button to turn on or turn off the AF function.

The RDS program will be automatically searched and received. The unit will search another frequency with this RDS program. Default setting is ON.

PTY (Program Type) function

1. Press the PTY button to turn the PTY function on.