St/Prog

2.Rotate VOL/SEL knob or press +/- buttons on the RC to select the music type or speech type: NEWS,

AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT, PTY NONE, POP M, ROCK M, EASY M, LIGHT M, CLASSICS, OTHER M, JAZZ, COUNTRY, NATION M, OLDIES, FOLK M.

Note: While selecting PTY engagement, its selection is implement by preset button as described in notes.

3.When PTY is selected the radio starts to search corresponding PTY information and stops of the corresponding PTY information is detected. If corresponding PTY information is not found, normal radio reception is resumed.

Press ST/PROG button or the SEL button (VOL knob) on the front panel or SEL button on RC, when ST ON or ST OFF is shown, select ST ON or ST OFF function so that you can choose either mono or stereo sound.

TA SEEK/TA ALARM

To choose the TA mode, press the VOL +/-/SEL knob for 2 seconds, then press it repeatedly until the display shows TA seek. Rotate the knob to choose between the TA SEEK and TA ALARM. After choosing, please leave the unit idle to activate. In TA SEEK mode, the unit will seek for traffic announcement programme when TA is pressed; in TA ALARM mode, no TA/TP is displayed and the alarm is set off.

MASK DPI/MASK ALL

Press the VOL +/-/SEL knob for 2 seconds, then press it repeatedly until the display shows MASK DPI. Rotate the encoder volume to toggle between MASK DPI and MASK ALL mode, then leave the unit idle to activate. During MASK DPI mode, the unit will mask only the AF which has different PI, this is the default mode; during MASK ALL mode, the unit will mask the AF which has different PI and no RDS signal with high field strength.