General operations
Power button
Press any button (except OPEN) or insert disc to switch the unit on. Press the POWER button to switch the unit off.
Volume control
Rotate the VOL knob on the front panel to adjust volume level.
Audio settings adjustment
Press SEL button until the display shows: VOL => BAS => TRB => BAL => FAD. Rotate the VOL knob to adjust each mode.
Press SEL button for 2 seconds to enter the menu mode. Press it repeatedly to choose the needed item: TA SEEK/ALARM => PI SOUND/MUTE => RETUNE L/S => MASK DPI/ALL => BEEP 2nd/ALL/OFF.
TA (Traffic Announcement) mode
To determine what action will the radio take if the newly tuned station does not receive TP
(Transport Program) information for 5 seconds. Rotate the VOL knob to select the desired mode: TA ALARM and TA SEEK.
-TA SEEK
When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station which has not the same station (PI – Program Information) as the last station, but has the TP information. When TP information gets lost at the current station for retune time which is set by RETUNE SHORT (30 seconds) or RETUNE LONG (90 seconds), the radio starts to retune to next same PI station. When same PI station does not catch in 1 cyclic search, the radio retunes to next station with TP information.
-TA ALARM
During searching the radio does not retune but the double beep sound (alarm) is output.
PI SOUND/MUTE
12