Alpine CDA-7977, CDA-7875 CD Player Operation, Opening and Closing the Movable display, Playback

CD Player Operation

SOURCE -/J

g DN f UP M.I.X. REPEAT SCAN c

Opening and Closing the Movable display

1 Press the c button.

The movable display will open.

Playback

1 Press the c button.

The movable display will open.

Insert a disc with the label side facing up.

To close the movable display, press the c button again.

The movable display will close.

NOTES

•Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.

•The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses.

•The display will stop at the set angle when closing.

CAUTION

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

2 Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically. The movable display will close and playback will begin.

When a disc is already inserted, press the SOURCE button to switch to the CD mode. The mode will change every time the button is pressed.

→TUNER → CD → CD CHANGER∗

(∗ Only when the CD changer is connected)

3 To pause playback, press the -/J button. Pressing the -/J button again will resume playback.

4 To eject the disc, press the c button.

NOTES

•If the CD does not eject, press c button again for more than 3 seconds with the movable display open.

•Only compact discs containing the mark shown can be used.

•We cannot fully guarantee the playback of CD-R (CD- Recordable). You cannot playback CD-RW (CD- ReWritable) on this unit.

16-EN