Alpine cda-7873, CDA-7875 Installation, Slide the mounting sleeve into the dashboard, Removal

Page 31

Installation

Metal plate

Detachable

Front panel

Caution

When you install this unit in your car, do not remove the Detachable Front Panel.

If the Detachable Front Panel is removed during installation, you might press too hard and warp the metal plate that holds it in place.

1

Mounting Sleeve

 

(Included)

Dashboard

�

CDA-7977/CDA-7876/CDA-7875/CDA-7873

Slide the mounting sleeve into the dashboard.

2

Screw

Hex Nut (M5)

∗∗

Bolt Stud

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-7977/CDA-7876/CDA- 7875/CDA-7873. Connect all other leads of the CDA- 7977/CDA-7876/CDA-7875/CDA-7873 according to details described in the CONNECTlONS section.

3

Lock Pin

Slide the CDA-7977/CDA-7876/CDA-7875/CDA- 7873 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel.

Removal

1Remove the DETACHABLE FRONT PANEL.

2Use a small screwdriver (or similar tool) to push the locking pins to the “up” position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

3Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

Metal

 

Mounting

∗

Strap

CDA-7977/

Ground LeadCDA-7876/

Chassis CDA-7875/

CDA-7873

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

NOTE

CDA-7977/

CDA-7876/

CDA-7875/

CDA-7873

Ground Lead

∗

Face Plate

Screws (M5 × 8) (Included)

For the screw marked **, use an appropriate screw for the chosen mounting location.

Mounting Bracket

NOTE

Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

29-EN

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CDA-7977 Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Attaching the Front Panel Turning Power On and OffBasic Operation Detaching the Front PanelDisplaying Time Display Angle Adjustment Selecting BBE Mode→ Balance → Fader → Volume Audio Mute FunctionEach press of the f UP button changes the modes as shown Setting Time Dimmer ControlChanging Lighting Color Subwoofer On and OffSound Beep Guide Function Turning Mute Mode On/OffCD Text Scroll Setting → SUB-W → Balance Volume ← Fader ←Demonstration Setting the AUX Mode V-LinkDemo OFF → Bass → Treble → OFF Setting the Bass ControlSetting the Treble Control Adjusting the built-in CrossoverHI-FI ←→ Normal Setting Bass Forward Switching the Tuner ModePress the Tune button to switch the Tuner mode DefeatSwitching the Display Modes Blackout Mode On and OffChanging the Audio Level Display Pattern Displaying the Title/Text CD/Changer modeAbout Title and Text Searching for Titled Discs/Titled Stations Titling Discs/StationsAutomatic Seek Tuning Manual TuningRadio Operation Tuning to Preset Stations Automatic Memory of Station PresetsPress the c button Movable display will open CD Player OperationOpening and Closing the Movable display PlaybackX. Random Play Music Sensor SkipFast Forward and Backward Repeat PlayControlling CD Changer Optional When a 12-disc CD Changer is connectedMulti-Changer Selection Receiving XM Channels with the XM Receiver Optional XM Radio OperationReceiving Stored XM Channels Storing XM Channel PresetsCDA-7876 only Category Search Changing the Display Controls on Remote Control Remote Control OperationBattery Replacement Case of Difficulty InformationNo Magzn Only SpecificationsPrecautions Installation and ConnectionsSlide the mounting sleeve into the dashboard InstallationRemoval 30-EN ConnectionsTo prevent external noise from entering the audio system 32-EN Limitation DES Garanties Tacites Numéros Dappel DU Service À LA ClienteleProduits Couvert PAR LA Garantie Durée DE LA GarantieWhat is not Covered Length of WarrantyLifetime Tape Head Warranty What is Covered
Top Page Image Contents