Alpine CDA-7876, CDA-7875, CDA-7977, cda-7873 owner manual Multi-Changer Selection

Page 21

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA-410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX).

1 Press the SOURCE button on the CDA-7977/ CDA-7876/CDA-7875/CDA-7873 to activate the CD Changer mode.

Alternatively, press the SOURCE button on the Remote Control (RUE-4187) to activate the CD Changer mode. Proceed to step 3 below to select the desired CD Changer.

SOURCE

BAND

2 Press the BAND button on the CDA-7977/CDA- 7876/CDA-7875/CDA-7873 or the RUE-4187 to activate the CD Changer Selection mode.

3 The CD Changer Selection mode remains active for 3 seconds after step 2 is performed. Press the BAND button until the desired CD Changer indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display will show “NO CHGR .”

Alternatively press the BAND button on the Remote Control until the desired changer indicator appears on the display.

4 To operate the selected changer, see “CD Player Operation” section.

NOTE

For further details about the external input (AUX) when using KCA-410C, see ”Setting the AUX Mode (V-Link)" on page 8.

19-EN

Image 21
Contents CDA-7977 Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Basic Operation Turning Power On and OffDetaching the Front Panel Attaching the Front Panel→ Balance → Fader → Volume Display Angle Adjustment Selecting BBE ModeAudio Mute Function Displaying TimeChanging Lighting Color Setting Time Dimmer ControlSubwoofer On and Off Each press of the f UP button changes the modes as shownCD Text Scroll Setting Turning Mute Mode On/Off→ SUB-W → Balance Volume ← Fader ← Sound Beep Guide FunctionSetting the AUX Mode V-Link DemonstrationDemo OFF Setting the Treble Control Setting the Bass ControlAdjusting the built-in Crossover → Bass → Treble → OFFPress the Tune button to switch the Tuner mode Setting Bass Forward Switching the Tuner ModeDefeat HI-FI ←→ NormalBlackout Mode On and Off Switching the Display ModesChanging the Audio Level Display Pattern CD/Changer mode Displaying the Title/TextAbout Title and Text Searching for Titled Discs/Titled Stations Titling Discs/StationsManual Tuning Automatic Seek TuningRadio Operation Tuning to Preset Stations Automatic Memory of Station PresetsOpening and Closing the Movable display CD Player OperationPlayback Press the c button Movable display will openFast Forward and Backward Music Sensor SkipRepeat Play X. Random PlayControlling CD Changer Optional When a 12-disc CD Changer is connectedMulti-Changer Selection Receiving XM Channels with the XM Receiver Optional XM Radio OperationStoring XM Channel Presets Receiving Stored XM ChannelsCDA-7876 only Category Search Changing the Display Controls on Remote Control Remote Control OperationBattery Replacement Case of Difficulty InformationNo Magzn Only SpecificationsPrecautions Installation and ConnectionsInstallation Slide the mounting sleeve into the dashboardRemoval 30-EN ConnectionsTo prevent external noise from entering the audio system 32-EN Produits Couvert PAR LA Garantie Numéros Dappel DU Service À LA ClienteleDurée DE LA Garantie Limitation DES Garanties TacitesLifetime Tape Head Warranty Length of WarrantyWhat is Covered What is not Covered