| English |
| In Case of Difficulty |
|
|
| Radio Mode |
|
|
Symptom | Cause and Solution |
|
|
Unable to receive stations. | • No antenna or open connection in cable. |
| – Make sure the antenna is properly |
| connected; replace the antenna or cable |
| if necessary. |
Unable to tune stations in the seek mode.
•You are in a weak signal area.
–Make sure the tuner is in the DX mode.
•If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.
–Check your antenna connections; make sure the antenna is properly grounded at its mounting location.
•The antenna may not be the proper length.
–Make sure the antenna is fully extended; if broken, replace the antenna with a new one.
Broadcast is noisy. | • The antenna is not the proper length. |
| – Extend the antenna fully; replace it if it is |
| broken. |
| • The antenna is poorly grounded. |
| – Make sure the antenna is grounded |
| properly at its mounting location. |
| Tape Mode | |
|
|
|
Output sounds dull. | • | The tape head needs cleaning. |
| • | – Clean the tape head. |
| Incorrect Dolby NR in use. |
– Check Dolby NR switch setting.
51