Alpine TDA-7547E TDA-7548E only Button, CD Shuttle mode Disc Select UP, Radio mode Seek DN Button

English

Remote Control

(TDA-7548E only)

						7	Button
							Radio mode: Pressing the button will
							select, in ascending order, stations
							programmed into the radio’s presets as
							shown below.
								→ 1→ 2… 6
6							Tape mode: Pressing the button
							automatically seeks a next musical track
							following several tracks from the current
							track, depending upon the number of the
							button pressed.
		REMOTE					CD Shuttle mode: DISC Select (UP)
		CONTROL		PWR			Button
		UNIT			1
							Press the button to select a disc in
		RUE-4180
							ascending order.
			VOL
							External audio processor mode:
							Press the button to select the equalizer,
7							surround preset called with the A. PROC
							button.
8					2	8	Button
							Radio mode: SEEK (DN) Button
					3		Tape mode: REW Button
							CD Shuttle mode: Press the button to
							go back to the beginning of the current
9					4		track.
	BAND SOURCE			A.PROC		9	Band/Program Button
							Radio mode: BAND Button
	PROG				5
	CD/3D/6D						Tape mode: Program Button
							Press the button to change playback
							direction. In combination of an Ai-NET
							applicable head unit and multiple CD
							sources… Press the button to select a
							CD source.
							Press the button, and the band will
							change as shown below.
						*	For the operation of external audio
							processor, refer to the Owner’s Manual
							of the external audio processor you
							purchased.
						**	The button is effective with Ai-NET
							system unit used.

48