Adjusting the Input Level, Bass EQ Adjustment

English

ADJUSTING THE INPUT LEVEL

•Adjust the input level of the amplifier to match the output of the connected head unit.

1.Press the MODE button until “GAIN” is displayed.

2.Press the DN/UP button to adjust the input level.

Adjustment range: 0.1V – 8V

BASS EQ ADJUSTMENT

•The output can be modified using a fixed, single band EQ at 45 Hz.

Set this EQ to a level that sounds best to you. Normally it is adequate set at 0dB, but if you feel

that the low frequency output is inadequate, then set it to a level that you like.

1.Press the MODE button until “B.EQ” is displayed.

Français

REGLAGE DU NIVEAU D’ENTREE

•Régler le niveau d’entrée de l’amplificateur pour le faire correspondre à la sortie de l’unité

principale connectée.

1.Appuyez sur la touche MODE jusqu’à ce que « GAIN » s’affiche.

2.Appuyez sur la touche DN/UP pour régler le niveau d’entrée.

Plage de réglage: 0,1V – 8V

REGLAGE DE CORRECTION DES BASSES

•La sortie peut être modifiée à l’aide d’un EQ à 45 Hz fixé et à bande simple.

Régler cet EQ à un niveau qui vous paraît optimal.

Normalement, elle est correctement réglée à 0 db, mais si vous pensez que la sortie de basses fréquences est inadéquate, réglez-la au niveau que vous souhaitez.

1.Appuyez sur la touche MODE jusqu’à ce que « B.EQ » s’affiche.

Español

AJUSTE DEL NIVEL DE ENTRADA

•Ajuste el nivel de entrada del amplificador con el fin de hacer coincidir la salida de la unidad

principal conectada.

1.Pulse el botón MODE hasta que se visualice “GAIN”.

2.Pulse el botón DN/UP para ajustar el nivel de entrada.

Gama de ajuste: 0,1 V – 8 V

AJUSTE DE GRAVES DE EQ

•Es posible modificar la salida utilizando un EQ de una sola banda fijo a 45 Hz.

Ajuste este EQ al nivel de su preferencia. Normalmente, es suficiente con ajustarla a 0dB,

pero si considera que la salida de baja frecuencia no es la adecuada, entonces ajústela al nivel de su preferencia.

1.Pulse el botón MODE hasta que se visualice “B.EQ”.

2. Press the DN/UP button to adjust the BASS	2. Appuyez sur la touche DN/UP pour régler	2. Pulse el botón DN/UP para ajustar el nivel
EQ level.	le niveau de correction des basses.	de GRAVES DE EQ.
Adjustment range: 0 dB – +16 dB	Plage de réglage : 0 dB - +16 dB	Gama de ajuste: 0 dB – +16 dB

MRD-M1005 specifications

The Alpine MRD-M1005 is a high-performance monoblock amplifier designed to deliver exceptional sound quality and power for car audio enthusiasts. With a compact design and advanced technology, it is engineered to bring out the best in your audio system, making it a popular choice among those looking for superior bass performance.

One of the standout features of the MRD-M1005 is its impressive power output. It is capable of delivering up to 1000 watts RMS at 2 ohms, allowing it to drive subwoofers with remarkable efficiency. This high wattage not only ensures a deep, rich bass response but also contributes to overall sound clarity at higher volume levels. The amplifier can be bridged for increased output, accommodating a variety of setup configurations.

Incorporating Alpine’s proprietary technologies, the MRD-M1005 boasts a Variable Low Pass Filter, allowing users to customize their audio experience by selecting the ideal frequency range for their subwoofers. The filter can be adjusted between 50 Hz to 200 Hz, enabling precise control over the bass response. Additionally, the amplifier features a Subsonic Filter that helps to eliminate low frequencies that can cause distortion, further enhancing sound quality.

The MRD-M1005 is built with a robust and durable structure, featuring a heat sink design that promotes efficient heat dissipation. This is crucial for maintaining performance during prolonged use, ensuring that the amplifier operates cool and reliable. Furthermore, the amplifier's compact size allows for flexible installation options in various vehicles, making it easier for users to integrate it into their audio setups without sacrificing valuable space.

The Alpine MRD-M1005 also includes a variety of input options, including RCA passthroughs, allowing for easy connection to additional audio components. The amplifier is compatible with a wide range of head units, making it an adaptable choice for different audio setups. Its built-in gain control provides users with the ability to fine-tune the output, ensuring a balanced and dynamic sound that suits their preferences.

In summary, the Alpine MRD-M1005 stands out due to its powerful output, advanced technology, and user-friendly features. Its combination of quality construction, adjustable filters, and versatile connectivity makes it an ideal choice for anyone looking to enhance their car audio experience. Whether you are an audio enthusiast or a casual listener, the MRD-M1005 provides the capability to deliver stunning sound quality and impressive performance on the road.