Alpine MRD-M1005 owner manual Prudencia, DE Alimentación

Page 4

English

 

Français

 

Español

CAUTION

ATTENTION

PRUDENCIA

CONNECTIONS OF POWER

CONNEXIONS DE LA BORNE

CONEXIONES DEL TERMINAL

SUPPLY TERMINAL

D’ALIMENTATION

DE ALIMENTACIÓN

●Before connecting the power supply wire to the unit, be sure to remove the negative (–) terminal of the vehicle’s battery.

•Make the power supply wire connection to the battery positive (+) terminal of the unit, before connecting the wire to the positive (+) terminal of the vehicle’s battery .

●Avant de connecter le fil d’alimentation à l’unité, s’assurer de retirer la borne négative (–) de la batterie du véhicule.

•Faire la connexion de fil d’alimentation à la borne positive (+) de l’unité, avant de connecter le fil à la borne positive (+) de la batterie du véhicule.

●Antes de conectar el alambre de alimentación a la unidad, asegúrese de desconectar negativo (–) de la batería del vehículo.

•Realice la conexión del alambre de alimentación al terminal (+) de la unidad, antes de conectar el alambre al terminal positivo (+) de la batería del vehículo.

●When connecting the power supply wire to the unit, be sure not to short the wire.

•If you tighten the screw to fix the power supply wire on the unit after the power supply connection is completed, the tool may touch the unit and may cause a short-circuit.

•Be sure not to allow the power supply wire to be exposed outside the terminal.

•Fix the power supply wire securely to prevent disconnection or dropping.

Fig. 1

●Lors de la connexion du fil d’alimentation à l’unité, s’assurer de ne pas court-circuiter le fil.

•Si vous serrez la vis pour fixer le fil d’alimenta- tion à l’unité après que la connexion d’alimenta- tion est terminée, l’outil peut toucher l’unité et peut causer un court-circuit.

•S’assurer de ne pas permettre au fil d’alimenta- tion d’être exposé à l’extérieur de la borne.

•Fixer le fil d’alimentation fermement afin d’empêcher qu’il se déconnecte ou tombe.

Fig. 2

Connected Battery/

Batterie Reliée/

Batería Conectada

●Al conectar el alambre de alimentación a la unidad, asegúrese de no cortocircuitar el alambre.

•Si aprieta el tornillo para fijar el alambre de alimentación en la unidad después de haber realizado la conexión de alimentación, la herramienta puede tocar la unidad y provocar un cortocircuito.

•No permita que el alambre de alimentación quede expuesto fuera del terminal.

•Fije el alambre de alimentación en forma segura para evitar que se desconecte o se caiga.

●When tightening the screw to fix the power supply wire, be sure not to touch the tool to the unit.

●Lors du serrage de la vis pour fixer le fil

d’alimentation, s’assurer de ne pas toucher l’outil ou l’unité.

●Cuando apriete el tornillo para fijar el alambre de alimentación, asegúrese de no tocar la unidad con la herramienta.

Connected Battery/

Batterie Reliée/Fig. 3

Batería Conectada

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Accessories Accessoires ContentsIndice Advertencia AvertissementUtilice Este Producto CON Aplicaciones Prudencia No Instale LA Unidad EN Lugares MUYPrudencia DE AlimentaciónRemarque NotaTo prevent external noise from entering the audio system Connections ConnexionsPara evitar que entre ruido externo en el sistema de audio Amplifier Link Connector RCA Input Jacks Pre-Out Jacks Battery Lead Sold SeparatelySpeaker Output Terminals Remote Turn-On Lead Blue/White, Sold SeparatelyRemarques Precauciones durante la conexión de alambresNotas TOP Cover Cómo Desinstalar O Instalar LA Cubierta SuperiorSwitch Settings Operation Method Método DE OperaciónSelecting the AMP ID Selection D’UN Identifiant D’AMPLIAdjusting the Input Level Bass EQ AdjustmentReglage DU Niveau D’ENTREE Reglage DE Correction DES BassesTo Display the Crossover Frequency To Display the Subsonic FilterPour Afficher LE Filtre Subsonique Visualización DE LA Frecuencia DE CruceEN CAS DE Probleme EN Caso DE DificultadSYSTEMS/SYSTEMES/SISTEMAS English Français EspañolEnglish Soins Pratiques Service CareCuidados Practicos Page Audio DE Voiture NavigationLimited Warranty

MRD-M1005 specifications

The Alpine MRD-M1005 is a high-performance monoblock amplifier designed to deliver exceptional sound quality and power for car audio enthusiasts. With a compact design and advanced technology, it is engineered to bring out the best in your audio system, making it a popular choice among those looking for superior bass performance.

One of the standout features of the MRD-M1005 is its impressive power output. It is capable of delivering up to 1000 watts RMS at 2 ohms, allowing it to drive subwoofers with remarkable efficiency. This high wattage not only ensures a deep, rich bass response but also contributes to overall sound clarity at higher volume levels. The amplifier can be bridged for increased output, accommodating a variety of setup configurations.

Incorporating Alpine’s proprietary technologies, the MRD-M1005 boasts a Variable Low Pass Filter, allowing users to customize their audio experience by selecting the ideal frequency range for their subwoofers. The filter can be adjusted between 50 Hz to 200 Hz, enabling precise control over the bass response. Additionally, the amplifier features a Subsonic Filter that helps to eliminate low frequencies that can cause distortion, further enhancing sound quality.

The MRD-M1005 is built with a robust and durable structure, featuring a heat sink design that promotes efficient heat dissipation. This is crucial for maintaining performance during prolonged use, ensuring that the amplifier operates cool and reliable. Furthermore, the amplifier's compact size allows for flexible installation options in various vehicles, making it easier for users to integrate it into their audio setups without sacrificing valuable space.

The Alpine MRD-M1005 also includes a variety of input options, including RCA passthroughs, allowing for easy connection to additional audio components. The amplifier is compatible with a wide range of head units, making it an adaptable choice for different audio setups. Its built-in gain control provides users with the ability to fine-tune the output, ensuring a balanced and dynamic sound that suits their preferences.

In summary, the Alpine MRD-M1005 stands out due to its powerful output, advanced technology, and user-friendly features. Its combination of quality construction, adjustable filters, and versatile connectivity makes it an ideal choice for anyone looking to enhance their car audio experience. Whether you are an audio enthusiast or a casual listener, the MRD-M1005 provides the capability to deliver stunning sound quality and impressive performance on the road.
Top Page Image Contents