Alpine DVA-5205P owner manual Use the Joystick to select, Rating level, then press ENT

Setting the rating level (parental lock)

SET UP

Use the “Joystick” to select the			• Changing the rating level temporarily
rating level, then press “ENT”.		Tips	Some discs may request that you change the
Select “OFF” to cancel the parental lock			rating level set in the default settings during
			playback. In this case, the following message
or if you do not want to set a rating level.
			appears on the screen:
The higher the number, the higher the			Still picture
rating level.
	ENT
				Still Picture
ENT
			When this appears, if you do not input the correct
			password either playback does not continue or a
Displays the setting contents.			picture for a different rating level is played.

Note: Press “RTN” to return to the previous screen.

Press “SET” for at least 2 seconds.

The settings are stored and the set up mode is canceled.

DISP MENU SET

SET UP

Notes:

•If you want to change the password, select “CHANGE PASSWORD”, then input the new password (4 digits).

•Write down the password on a piece of paper and store the piece of paper somewhere in case you forget it.

•On unrated DVDs, playback will not be restricted even if the rating level is set.

•Once set, this rating level remains in memory until changed. To enable the play of discs of higher rating levels or to cancel the parental lock, the setting must be changed.

•Not all DVDs provide a Parental Lock feature. If you are unsure about a DVD, play it first to

confirm. Do not leave DVDs accessible to young children for whom you deem them inappropriate.

.

29